Order by phone: 1-800-823-8082 / +1-508-964-6300 M-F 8:30am to 5:30pm EST

TS700 700w Power Supplies

700W True Sine Wave DC-AC Power Inverter

Model Number

Input Voltage Range

Efficiency

Input Fuse

Battery Low Alarm

Battery Low Shutdown

TS700-112F

10.5~15Volts(DC)

86%

40Amps*3

11.3±4%

10.5±4%

TS700-124F

21~30Volts(DC)

88%

30Amps*2

22.5±4%

21±4%

TS700-148F

42~60Volts(DC)

89%

20Amps*2

45±4%

42±4%

True sine wave output (THD<3%)

High surge power up to 1400W

High efficiency up to 91%

Power ON-OFF switch

Standby saving mode can be selectable

Front panel indicator for operation status

TS700 series

Input Specifications

Input Voltage Range

10.5~15Volts(DC)

No Load Power Consumption

? 6W @ standby saving mode

Off Mode Current Draw

? 1 mAmps

Battery Types

Open & sealed Lead Acid

Battery Polarity

By internal fuse open

Efficiency

86%

Input Fuse

40Amps*3

Battery Low Alarm

11.3±4%

Battery Low Shutdown

10.5±4%

General Specifications

Isolation

3000VAC Bat I/P - AC O/P

Output-Ground Isolation

1500VAC AC O/P - FG

Insulation Resistance

AC O/P-FG, Bat I/P-FG: 100M?/500VDC/25°C/70% RH

Physical Specifications

Size (mm)

295 x 184 x 70

Size (Inches)

11.61” x 7.24” x 2.76”

Weight (g)

3800g

Weight (oz)

134.04 oz

Output Specifications

Output Voltage

100/110/115/120VAC select by S.W Factory setting @ 110VAC

Frequency Range

60 ±0.1Hz 50/60Hz select by S.W

Peak Load

800W for 180S/1050W for 10S /surge power 1400W for 30 cycles

Waveform

True sine wave (THD<3%) at rated input voltage

Load Regulation

±3.0%

Saving Mode

Load ?5W will be changed to standby mode

Front Panel Indicator

Battery voltage level, output load level, saving mode, fault and operation status

GFCI Protection

Optional (Only type F)

Over Current Protection

105~115% for 180S,115~150% for 10S Shutdown o/p voltage, re-power

Over Temperature Protection

80°C ±5°C Shutdown o/p voltage, repower; by internal RTH3 detect on heatsink of power diode

Short Circuit Protection

Shutdown o/p voltage, re-power

Environmental Specifications

Operating Temperature

0°C to +40°C @ 100% load 60°C @ 50% load

Vibration

10~500Hz, 3G10min./1cycle, period for 60min. each along X, Y, Z axes

Storage Temperature

-30°C ~ +70°C /-22~+158°F 10~95% RH

Relative Humidity

20 to +90% RH non cond

EMI

Compliance to FCC class A

Notes

1. Efficiency is tested by 530W, linear load at 13V, 26V, 52V input voltage.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.