Order by phone: 1-800-823-8082 / +1-508-964-6300 M-F 8:30am to 5:30pm EST

TS1000 1000w Power Supplies

TS1000 1000w  Power Supplies

1000W True Sine Wave DC-AC Power Inverter

True sine wave output (THD<3%)Built-in active PFC function, PF >0.94

High surge power up to 2000W

High efficiency up to 92%

Power ON-OFF switch

Standby saving mode can be selected

Front panel indicator for operation status

Model Number

Input Voltage Range

Efficiency

Battery Low Alarm

Battery Low Shutdown

TS1000-112

12 Volts(DC)

88%

11.3±4%

10.5±4%

TS1000-124

24 Volts(DC

89%

22.5±4%

21±4%

TS1000-148

48 Volts(DC)

90%

45±4%

42±4%

TS1000 series

Input Specifications

Input Voltage Range

12 Volts(DC)

No Load Power Consumption

? 6W @ standby saving mode

Off Mode Current Draw

? 1 mAmps

Battery Types

Open & sealed lead Acid

Efficiency

88%

Input Fuse

40Amps*4

Battery Low Alarm

11.3±4%

Battery Low Shutdown

10.5±4%

Reverse Polarity

By internal fuse open

General Specifications

Isolation

3000VAC Bat I/P - AC O/P

Output-Ground Isolation

1500VACAC O/P - FG

Insulation Resistance

AC O/P-FG, Bat I/P-FG: 100M?/500VDC/25°C/70% RH

Safety Approvals

UL458(only ”GFCI” recepltacles-types F)

Physical Specifications

Size (mm)

345 x 184 x 70

Size (Inches)

13.58” x 7.24” x 2.76”

Weight (g)

4300g

Weight (oz)

151.68 oz

Notes

1.Efficiency is tested by 750W, linear load at 13V, 26V, 52V input voltage.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Output Specifications

Output Voltage

Factory setting set @ 110VAC 100/110/115/120VAC select by S.W

Frequency Range

60 0.1Hz 50/60Hz select by S.W

Peak Load

1150W for 180 S/1500W for 10S / surge power 2000W for 30 cycles

Waveform

True sine wave (THD<3%) at rated input voltage

Load Regulation

±3.0%

Saving Mode

Load?5W will be changed to standby mode

Front Panel Indicator

Battery voltage level, output load level, saving mode, fault and operation status

GFCI Protection

Optional (Only type F)

Over Current Protection

105~115% for 180S,115~150% for 10S Shutdown o/p voltage, re-power\

Over Temperature Protection

90°C±5°C Shutdown o/p voltage, repower after cool down; by internal RTH3 detect on heatsink of power diode

Short Circuit Protection

Shutdown o/p voltage, repower

Environmental Specifications

Operating Temperature

0°C to +40°C @ 100% load 60°C @ 50% load

Vibration

10~500Hz, 3G10min./1cycle, period for 60min. each along X, Y, Z axes

Storage Temperature

-30°C ~ +70°C /-22~+158°F 10~95% RH

Relative Humidity

20 to +90% RH non cond

EMI

Compliance to FCC class A

Cooling

Loading controlled cooling fan for GFCI receptacle-type F Thermostatically controlled cooling fan for others