TP150DRL 150w Power Supplies

150W Triple Output with PFC Function

	Universal AC input/full range
	Built-in active PFC function, PF>0.94
	Protections: Short circuit/Over load/Over voltage
	Forced Air Cooling by built-in DC fan
	Fixed switching frequency at 100KHz

Model Number	Output Voltage	Output Amps	Ripple and Noise	Voltage Tolerance	Minimum Load Requirement	Efficiency
TP150-A	5V, 12V, -5V	15A, 6A, 0.6A	100mVp-p max., 120mVp-p max., 100mVp-p max. (Note 2)	+/-3.0%, +/-8.0%, +/-6.0% (note 3)	2~20A, 0.4~7A, 0~1A	75% typ.
TP150-B	5V, 12V, -12V	15A, 5.5A, 0.6A	100mVp-p max., 120mVp-p max., 100mVp-p max. (Note 2)	+/-3.0%, +/-8.0%, +/-6.0% (note 3)	2~20A, 0.4~7A, 0~1A	77% typ.
TP150-C	5V, 15V, -15V	15A, 4.5A, 0.6A	100mVp-p max., 150mVp-p max., 100mVp-p max. (Note 2)	+/-3.0%, +/-10, -6%, +/-6.0% (note 3)	2~20A, 0.4~6A, 0~1A	77% typ.
TP150-D	5V, 24V, 12V	15A, 3A, 0.6A	100mVp-p max., 150mVp-p max., 100mVp-p max. (Note 2)	+/-3.0%, +/-8.0%, +/-6.0% (note 3)	2~20A, 0.4~4A, 0~1A	78% typ.

TP150/DRL series

Input Specifications

General Specifications

Isolation	3KVAC (Note 4)
Isolation Input-Ground	1.5KVAC (Note 4)
Isolation Output-Ground	0.5KVAC (Note 4)
Insulation Resistance	100M Ohms/500VDC (Note 4)
Efficiency	75% typ.
Safety Approvals	UL60950-1, TUV EN60950-1 Approved (Note 4)
Harmonic Current	Compliance to EN61000-3-2,-3

Environmental Specifications

Input Voltage Range	90~264VAC 127~370VDC
Frequency Range	47~63Hz
Inrush Current	Cold Start ?40A/230V typ.
Input Current	2.5A/115VAC 1.2A/230VAC typ
Leakage Current	<3.5mA/240VAC
Power Factor Correction	PF>0.94/230VAC PF>0.98/115VAC at Full Load typ

Operating Temperature	-10~+60°C (Refer to output load derating curve)
Storage Temperature	-20~+85°C
Working Humidity	20 ~ 90 % RH non-condensing
Storage Humidity	10~95% RH
EMI	Compliance to EN55022 (CISPR22) Class B (Note 4)
MTBF	161.6K hrs. min MIL-HDBK-217F (25°C)
Vibration	10~500HZ, 2G 10 min/1 cycle, 60 min. each along X, Y, Z axes
EMS	Compliance to EN-61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A (Note 4)

Output Specifications

Output Voltage	5V
Output Amps	15A
Load Regulation	±3.0%
Line Regulation	±1%
Temperature Coefficient	±0.03%/°C (0~50°C)
Ripple and Noise	100mVp-p max. (Note 2)
Over Voltage Protection	5.75~6.75V on +5V. Protection type: Shutdown o/p voltage, re-power on to recover.
Over Current Protection	105~150% rated output power. Protection type: Hiccup mode, recovers automatically after fault condition is removed.
Over Temperature Protection	95°C ±5°C (TSW1). Protection type: shot down o/p voltage, recovers automatically after temperature goes down.
Voltage Tolerance	±3% (Note 3)
DC Voltage Adjust	4.75~5.5V
Minimum Load Requirement	2~20A
Rise Time	800ms, 60ms/230VAC; 800ms, 60ms/115VAC at full load
Hold Up Time	24ms/230VAC 24ms/115VAC at full load typ.

Size (mm)	199mm x 99mm x 50mm
Weight (g)	0.9Kg; 20pcs/19Kg/1.28CUFT

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

2. Ripple and noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equpiment must be re-confirmed that it still meets EMC directives.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Physical Specifications

Notes

Power Supply Search

TP150DRL 150w Power Supplies