Order by phone: 1-800-823-8082 / +1-508-964-6300 M-F 8:30am to 5:30pm EST

SPU131 131 Watt Switch Mode Power Supplies

130 Watt Desktop Switching Power Supplies for I.T.E

Wide Input Voltage 90 to 264 VAC, 47 to 63 Hz

IEC-320-C14 Input Inlet

Single Output

Class I

LPS Energy Efficiency Level V

Input Surge Current, Over Voltage and Over Current Protection

Output Voltage Protection

Model Number

Output Voltage

Output Amps

SPU131-105 (S)

12vdc

10.84 Amps
SPU131-106 (S)

15vdc

8.66 Amps
SPU131-107 (S) 18vdc 7.22 Amps

SPU131-108 (S)

24vdc

5.42 Amps
SPU131-109 (S) 30vdc 4.33 Amps
SPU131-110 (S) 36vdc 3.61 Amps
SPU131-111 (S) 48vdc 2.70 Amps

SPU131-112 (S)

55vdc

2.36 Amps

SPU131 series

Input Specifications

Input Voltage Range

90-260 VAC

Frequency Range

47-63 Hz

Inrush Current

Low Line 30Amps max @ 115VAC / High Line 50Amps max @ 230VAC (Cold Start) FL

Input Current

Low Line 1.32Amps max @ 115VAC / High Line 0.66Amps max @ 230VAC FL

Leakage Current

0.75 mAmps max.@ 240VAC / 60 Hz

Power Factor Correction

0.95~1 @ 230VAC

General Specifications

Isolation

4242vdc

Isolation Input-Ground

2121vdc

Insulation Resistance

50 MΩ / 230VAC

Efficiency

88% FL, 230VAC, typ.

Physical Specifications

Size (mm)

188.9 x 89.5 x 45.5 mm

Size (Inches)

7.44” x 3.52” x 1.79”

Weight (g)

778-800g

Weight (oz)

27.44-28.22oz

Output Specifications

Output Voltage

12vdc

Output Amps

10.84 Amps

Load Regulation

± 5%, max. @ 230VAC @FL

Line Regulation

± 1%, max. ± 0.5% typ.

Temperature Coefficient

±0.04%/°C

Ripple and Noise

1% Pk-Pk @ 90VAC @ FL

Over Voltage Protection

112~132%

Over Current Protection

110~150%

Transient Response

4mS @ 100VAC

Start Up, Rise Time

2S max. @ 100VAC @ FL

Hold Up Time

16mS min @ 110VAC @ FL

Environmental Specifications

Operating Temperature

0 to +70°C (See derate curve) 40°C typ.

Storage Temperature

-40 to +85°C

Working Humidity

5% to 95%, non-cond

EMI

CISPR-22 Class B @ 220VAC FCC PART-15 Class B @ 110VAC

MTBF

0.1 MHrs MIL-HDBK-217F(25°C)

Notes

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.