SP200DRL 200w Power Supplies

200W Single Output with PFC Function

	Universal AC input/full range
	Built-in active PFC function, PF>0.93
	Protections: Short circuit/Over Load/Over voltage/Over Temperature
	Built-in cooling fan speed control
	Built-in constant current limiting circuit
	Built-in fan speed control

Model Number	Output Voltage	Output Amps	Load Regulation	Ripple and Noise	Over Voltage Protection	Voltage Tolerance	DC Voltage Adjust	Minimum Load Requirement	Efficiency
SP200-3.3	3.3V	40A	+/-1%	100mVp-p max. (Note 2)	3.63~4.46V Shut down o/p voltage, re-power on to recover	+/-2% (Note 3)	3.14~ 3.63V	0~40A	65% typ.
SP200-5	5V	40A	+/-1%	100mVp-p max. (Note 2)	5.5~6.75V Shut down o/p voltage, re-power on to recover	+/-2% (Note 3)	4.75~ 5.5V	0~40A	71% typ.
SP200-7.5	7.5V	26.7A	+/-1%	100mVp-p max. (Note 2)	8.25~10.13V Shut down o/p voltage, re-power on to recover	+/-2% (Note 3)	7.13~ 8.25V	0~26.7A	76% typ.
SP200-12	12V	16.7A	+/-0.5%	100mVp-p max. (Note 2)	13.2~16.2V Shut down o/p voltage, re-power on to recover	+/-2% (Note 3)	11.4~ 13.2V	0~16.7A	79% typ.
SP200-13.5	13.5V	14.9A	+/-0.5%	100mVp-p max. (Note 2)	14.85~18.2V Shut down o/p voltage, re-power on to recover	+/-2% (Note 3)	12.8~ 14.9V	0~14.9A	80% typ.
SP200-15	15V	13.4A	+/-0.5%	100mVp-p max. (Note 2)	16.5~20.25V Shut down o/p voltage, re-power on to recover	+/-2% (Note 3)	14.3~ 16.5V	0~13.4A	81% typ.
SP200-24	24V	8.4A	+/-0.5%	150mVp-p max. (Note 2)	26.4~32.4V Shut down o/p voltage, re-power on to recover	+/-1% (Note 3)	22.8~ 26.4V	0~8.4A	83% typ.
SP200-27	27V	7.5A	+/-0.5%	150mVp-p max. (Note 2)	29.7~36.45V Shut down o/p voltage, re-power on to recover	+/-1% (Note 3)	25.7~ 29.7V	0~7.5A	83% typ.
SP200-48	48V	4.2A	+/-0.5%	250mVp-p max. (Note 2)	52.8~64.8V Shut down o/p voltage, re-power on to recover	+/-1% (Note 3)	45.6~ 52.8V	0~4.2A	84% typ.

SP200/DRL series

Input Specifications

General Specifications

Isolation	3KVAC (Note 4)
Isolation Input-Ground	1.5KVAC (Note 4)
Isolation Output-Ground	0.5KVAC (Note 4)
Insulation Resistance	100M Ohms/500VDC (Note 4)
Efficiency	65% typ.
Safety Approvals	UL60950-1, TUV EN609050-1 and S-MARK J60950 Approved (Note 4)
Harmonic Current	Compliance to EN61000-3-2,-3 (Note 4)

Environmental Specifications

Input Voltage Range	85~264VAC 120~370VDC
Frequency Range	47~63Hz
Inrush Current	Cold Start 40A/230VAC typ.
Input Current	3.5A/115VAC 1.7A/230VAC typ.
Leakage Current	<2mA/240VAC
Power Factor Correction	PF>0.93/230VAC PF>0.98/115VAC at full load typ.

Operating Temperature	-10~+60°C (Refer to output load derating curve)
Storage Temperature	-20~+85°C
Working Humidity	20 ~ 90 % RH non-condensing
Storage Humidity	10 ~ 95% RH
EMI	Compliance to EN55022 (CISPR22) Class B (Note 4)
MTBF	183.8K hrs min. MI:-HDBK-217F (25°C)
Vibration	10~500Hz, 2G 10min./l Cycle, 60 min. each along X, Y, Z axes
EMS	Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, EN55024, Light Industry Level, criteria A (Note 4)

Size (mm)	199mm x 99mm x 50mm
Weight (g)	0.85Kg; 20pcs/17.9Kg/1.28CUFT

Output Specifications

Output Voltage	3.3V
Output Amps	40A
Load Regulation	±1%
Line Regulation	±0.5%
Temperature Coefficient	±0.05%/°C (0~50°C)
Ripple and Noise	100mVp-p max. (Note 2)
Over Voltage Protection	3.63~4.46V Shut down o/p voltage, re-power on to recover
Over Current Protection	105 ~ 150% rated output power. Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Temperature Protection	95°C ±5°C (TSW1 : Detect on heatsink of power transistor). Protection type: shut down o/p voltage, recovers automatically after tempertature goes down
Voltage Tolerance	±2% (Note 3)
DC Voltage Adjust	3.14~3.63V
Minimum Load Requirement	0~40A
Rise Time	600ms, 30 ms at full load
Hold Up Time	20mS at full load typ.
Remote Shutdown	CN1:4 ~ 10VDC POWER ON, <0 ~ 0.8VDC POWER OFF (option)

Physical Specifications

Notes

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

2. Ripple and noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equpiment must be re-confirmed that it still meets EMC directives.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Power Supply Search

SP200DRL 200w Power Supplies