Order by phone: 1-800-823-8082 / +1-508-964-6300 M-F 8:30am to 5:30pm EST

SP200 200w Power Supplies

200W Single Output with PFC Function

Universal AC input

Protections:Short circuit/Over load/Over voltage/Over temperarure

Built-in active PFC function, PF >0.93

Built-in cooling fan speed control

Built-in constant current limiting circuit

Remote ON-OFF control(optional)

Model Number

Output Voltage

Output Amps

Load Regulation

Ripple and Noise

Over Voltage Protection

DC Voltage Adjust (typ.)

Efficiency

SP200-3.3

3.3 Volts(DC)

40 Amps

±1.0%

100mVpk-pk (Note 1)

3.63 ~ 4.46Volt(DC) Shut down o/p voltage, re-power

3.14~3.63Volt(DC)

0.65

SP200-5

5 Volts(DC)

40 Amps

±1.0%

100mVpk-pk (Note 1)

5.5 ~ 6.75Volt(DC) Shut down o/p voltage,re-power

4.75~5.5Volt(DC)

0.71

SP200-7.5

7.5 Volts(DC)

26.7 Amps

±1.0%

100mVpk-pk (Note 1)

8.25 ~ 10.13Volt(DC) Shut down o/p voltage,re-power

7.13~8.25Volt(DC)

0.76

SP200-12

12 Volts(DC)

16.7 Amps

±0.5%

100mVpk-pk (Note 1)

13.2 ~ 16.2Volt(DC) Shut down o/p voltage,re-power

11.4~13.2Volt(DC)

0.79

SP200-13.5

13.5 Volts(DC)

14.9 Amps

±0.5%

100mVpk-pk (Note 1)

14.85 ~ 18.2Volt(DC) Shut down o/p voltage, re-power

12.8~14.9Volt(DC)

0.8

SP200-15

15 Volts(DC)

13.4 Amps

±0.5%

100mVpk-pk (Note 1)

16.5 ~ 20.25Volt(DC) Shut down o/p voltage,re-power

14.3~16.5Volt(DC)

0.81

SP200-24

24 Volts(DC)

8.4 Amps

±0.5%

150mV pk-pk (Note 1)

26.4 ~ 32.4Volt(DC) Shut down o/p voltage,re-power

22.8~26.4Volt(DC)

0.83

SP200-27

27 Volts(DC)

7.5 Amps

±0.5%

150mV pk-pk (Note 1)

29.7 ~ 36.45Volt(DC) Shut down o/p voltage,re-power

25.7~29.7Volt(DC)

0.83

SP200-48

48 Volts(DC)

4.2 Amps

±0.5%

250mV pk-pk (Note 1)

52.8 ~ 64.8Volt(DC) Shut down o/p voltage,re-power

45.6~52.8Volt(DC)

0.84

SP200 series

Input Specifications

Input Voltage Range

90 ~ 264VAC 120~370 Volts(DC)

Input Reflected Ripple Current

3.5Amps @115VAC, 1.7 Amps @ 230VAC

Frequency Range

47-63 Hz

Inrush Current

20Amps/115VAC; 40Amps 230VAC (cold start)

General Specifications

Isolation

4242VDC

Isolation Input-Ground

2121VDC

Isolation Output-Ground

707VDC

Insulation Resistance

65%

Switching Frequency

UL60950-1, TUV EN60950-1 Approved

Environmental Specifications

Operating Temperature

-10°C to +60°C (See Derate Curve)

Storage Temperature

-20°C to +85°C, 10~95% RH

Relative Humidity

20~90% RH non cond

EMI

Compliance to EN55022 (CISPR22) Class B

MTBF

183.8KHrs min,MIL-HDBK-217F(25°C)

EMS

Compliance to EN61000-4-2,3,4,5,6,8,11 ENV50204,EN55024, light Industry Level, Criteria A

Output Specifications

Output Voltage

3.3 Volts(DC)

Output Amps

40 Amps

Load Regulation

±1.0%

Line Regulation

±0.5%

Temperature Coefficient

0.05% / °C (0-50°C)

Ripple and Noise

100mVpk-pk (Note 1)

Over Voltage Protection

3.63 ~ 4.46Volt(DC) Shut down o/p voltage, re-power

Over Current Protection

105 ~ 150% rated output power Constant current limiting,auto recover

Over Temperature Protection

95°C ±5°C TSW1: detect on heatsink of power transistor Shut down o/p voltage, auto recover

DC Voltage Adjust (typ.)

3.14~3.63Volt(DC)

Hold Up Time

20mS @ FL (typ.)

Remore Shutdown

CN1:4~10Volts(DC) Power On, <0~0.8Volts(DC) Power off

Physical Specifications

Notes

Size (mm)

199 x 99 x 50mm

Size (Inches)

7.84” x 3.90 ” x 1.97 ”

Weight (g)

850g

Weight (oz)

29.99oz

1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.