Order by phone: 1-800-823-8082 / +1-508-964-6300 M-F 8:30am to 5:30pm EST

SP100DRL 100w Power Supplies

100W Single Output with PFC Function

Universal AC input / full range

Built-in active PFC function, PF.0.93

Protections: Short circuit/Over load/Over voltage

Built-in constant current limiting circuit

Remote ON-OFF control (optional)

LED indicator for power on

Model Number

Output Voltage

Output Amps

Load Regulation

Ripple and Noise

Over Voltage Protection

DC Voltage Adjust

Minimum Load Requirement

Efficiency

SP100-3.3/DRL

3.3V

30A

±1%

100mVpk-pk (Note 2)

3.63~4.46V Shut down o/p voltage, re-power on to recover

3.14~3.63V

0~20A

70% typ.

SP100-5/DRL

5V

20A

±1%

100mVpk-pk (Note 2)

5.5~6.75V Shut down o/p voltage, re-power on to recover

4.75~5.5V

0~20A

76% typ.

SP100-7.5/DRL

7.5V

13.5A

±1%

100mVpk-pk (Note 2)

8.25~10.13V Shut down o/p voltage, re-power on to recover

7.13~8.25V

0~13.5A

78% typ.

SP100-12/DRL

12V

8.5A

±0.5%

100mVpk-pk (Note 2)

13.2~16.2V Shut down o/p voltage, re-power on to recover

11.4~13.2V

0~8.5A

80% typ.

SP100-13.5/DRL

13.5V

7.5A

±0.5%

100mVpk-pk (Note 2)

14.85~18.23V Shut down o/p voltage, re-power on to recover

12.8~14.9V

0~7.5A

80% typ.

SP100-15/DRL

15V

6.7A

±0.5%

100mVpk-pk (Note 2)

16.5~20.25V Shut down o/p voltage, re-power on to recover

14.3~16.5V

0~6.7A

82% typ.

SP100-24/DRL

24V

4.2A

±0.5%

150mVpk-pk (Note 2)

26.4~32.4V Shut down o/p voltage, re-power on to recover

22.8~26.4V

0~4.2A

84% typ.

SP100-27/DRL

27V

3.8A

±0.5%

150mVpk-pk (Note 2)

29.7~36.45V Shut down o/p voltage, re-power on to recover

25.7~29.7V

0~3.8A

83% typ.

SP100-48/DRL

48V

2.1A

±0.5%

250mVpk-pk (Note 2)

52.8~64.8V Shut down o/p voltage, re-power on to recover

45.6~52.8V

0~2.1A

82% typ.

SP100DRL series

Input Specifications

General Specifications

Isolation

3KVAC (Note 4)

Isolation Input-Ground

1.5KVAC (Note 4)

Isolation Output-Ground

0.5KVAC (Note 4)

Insulation Resistance

100M Ohms/500VDC (Note 4)

Efficiency

70% typ.

Safety Approvals

UL60950-1, TUV EN60950-1 Approved (Note 4)

Harmonic Current

Compliance to EN6100-3-2,-3 (Note 4)

Environmental Specifications

Operating Temperature

-10°C to +60°C (Refer to output load derating curve)

Storage Temperature

-20°C to +85°C

Working Humidity

20 ~ 90% RH non-condensing

Storage Humidity

10 ~ 95% RH

EMI

Compliance to EN55022 (CISPR22) Class B (Note 4)

MTBF

211.3K hrs min. MIL-HDBK-217F (25°C)

Vibration

10 ~ 500Hz, 2G 10min./1 cycle, 60 min. each along X, Y, Z axes

EMS

Compliance to EN6100-4-2, 3, 4, 5, 6, 8, 11; ENV50204, EN55024, Light Industry level, criteria A (Note 4)

Input Voltage Range

85 ~ 264VAC 120 ~ 340VDC

Frequency Range

47~63Hz

Inrush Current

Cold Start 30A/230VAC typ.

Input Current

1.7A/115VAC 0.8A/230VAC typ.

Leakage Current

<2mA/240VAC

Power Factor Correction

PF>0.93/230VAC PF>0.98/115VAC at full load typ.

Physical Specifications

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

2. Ripple and noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equpiment must be re-confirmed that it still meets EMC directives.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Output Specifications

Size (mm)

179x99x45

Weight (g)

0.66Kg; 20pcs/14.3Kg/1.17CUFT

Notes

Output Voltage

3.3V

Output Amps

30A

Load Regulation

±1%

Line Regulation

±0.5%

Temperature Coefficient

±0.05%/°C (0~50°C)

Ripple and Noise

100mVpk-pk (Note 2)

Over Voltage Protection

3.63~4.46V Shut down o/p voltage, re-power on to recover

Over Current Protection

105~150% rated output power. Protection type: Constant current limiting, recovers automatically after fault condition is removed

Voltage Tolerance

±2.0% (Note 3)

DC Voltage Adjust

3.14~3.63V

Minimum Load Requirement

0~20A

Rise Time

600ms, 30ms at full load

Hold Up Time

20mS at full load typ.

Remote Shutdown

CN1:4 ~ 10VDC POWER ON, <0~0.8VDC POWER OFF (option)