1500W Single Output Power Supply

	Universal AC input
	Protections:Short circuit/Over load/Over voltage/Over temperature
	Built-in active PFC function, PF>0.95
	Forced air cooling by built-in DC ball bearing fan
	Built-in remote sense function
	Built-in remote ON OFF control

Model Number	Output Voltage	Output Amps	Load Regulation	Ripple and Noise	Over Voltage Protection	DC Voltage Adjust (typ.)	Hold Up Time	Efficiency
RSP1500-5	12vdc	240 Amps	±2.0%	150mVpk-pk (Note 1)	5.75 ~ 6.75Volt(DC) Constant current limit, Shutdown o/p volage, re-power	4.5~5.5Volt(DC)	10mS	0.8
RSP1500-12	13.5vdc	125 Amps	±0.5%	150mVpk-pk (Note 1)	13.8 ~ 16.8Volt(DC) Constant current limit, Shutdown o/p volage, re-power	10~13.5Volt(DC)	10mS	0.87
RSP1500-15	15vdc	100 Amps	±0.5%	150mVpk-pk (Note 1)	17 ~ 20.5Volt(DC) Constant current limit, Shutdown o/p volage, re-power	13.5~16.5Volt(DC)	14mS	0.87
RSP1500-24	24vdc	63 Amps	±0.5%	150mVpk-pk (Note 1)	27.6 ~ 32.4Volt(DC) Constant current limit, Shutdown o/p volage, re-power	20~26.4Volt(DC)	14mS	0.9
RSP1500-27	27vdc	56 Amps	±0.5%	150mVpk-pk (Note 1)	31 ~ 36.5Volt(DC) Constant current limit, Shutdown o/p volage, re-power	24~30Volt(DC)	16mS	0.9
RSP1500-48	48vdc	32 Amps	±0.5%	200mVpk-pk (Note 1)	57.6~ 67.2Volt(DC) Constant current limit, Shutdown o/p volage, re-power	43~56Volt(DC)	16mS	0.91

RSP1500 series

Input Specifications

Input Voltage Range	90 ~ 264VAC 127~370vdc
Input Reflected Ripple Current	17 Amps @ 115VAC, 8.0 Amps @ 230VAC
Frequency Range	47-63 Hz
Inrush Current	30Amps/115VAC; 60Amps 230VAC (cold start)

General Specifications

Isolation	4242VDC
Isolation Input-Ground	2121VDC
Isolation Output-Ground	707VDC
Insulation Resistance	80%
Switching Frequency	UL60950-1, TUV EN60950-1 Approved

Environmental Specifications

Operating Temperature	-20°C to +70°C (See Derate Curve)
Storage Temperature	-40°C to +85°C, 10~95% RH
Relative Humidity	20~90% RH non cond
MTBF	62.6KHrs min,MIL-HDBK-217F(25°C)
EMS	Compliance to EN61000-4-2,3,4,5,6,8,11 ENV50204, EN55024 light Industry Level, Criteria A

Output Specifications

Output Voltage	12vdc
Output Amps	240 Amps
Load Regulation	±2.0%
Line Regulation	±0.5%
Temperature Coefficient	±0.05% / °C (0-50°C)
Ripple and Noise	150mVpk-pk (Note 1)
Over Voltage Protection	5.75 ~ 6.75Volt(DC) Constant current limit, Shutdown o/p volage, re-power
Over Current Protection	105~135% rated output power Constent current limiting,auto recover
DC Voltage Adjust (typ.)	4.5~5.5Volt(DC)
Hold Up Time	10mS
Remore Shutdown	Please see the Function Manual

1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Physical Specifications

Size (mm)	278 x 127 x 83.5mm
Size (Inches)	10.95”x5 ”x3.29”
Weight (g)	2600g
Weight (oz)	91.71oz

Notes

RSP1500 1500 Watt Enclosed Power Supplies

1500W Single Output Power Supply

Power Supply Search