Order by phone: 1-800-823-8082 / +1-508-964-6300 M-F 8:30am to 5:30pm EST

RID65 65 Watt Switch Mode Power Supplies

65W Dual Output Switching Power Supply

Isolated Output

Universal AC input

Protections: Short circuit / Overload / Over voltage

Cooling by free air convection

LED indicator for power on

All using 105°C long life electrolytic capacitors

Model Number

Output Voltage

Output Amps

Line Regulation

Ripple and Noise

Efficiency

RID65-A

5vdc/12vdc

6 Amps/3 Amps

±0.5%/±1.5% (Note 3)

80mV pk-pk/120mV pk-pk (Note 1)

0.81

RID65-B

5vdc/24vdc

4 Amps/2 Amps

±0.5%/±2.0% (Note 3)

80mV pk-pk/150mV pk-pk (Note 1)

0.82

RID65 series

Input Specifications

Input Voltage Range

90 ~ 264 VAC; 125~373vdc

Input Reflected Ripple Current

2.0 Amps. @ 115VAC, 1.2 Amps. @ 230VAC

Frequency Range

47-63 Hz

Inrush Current

40 Amps / 230VAC (cold start)

General Specifications

Isolation

4242VDC

Isolation Input-Ground

2121VDC

Isolation Output-Ground

707VDC

Insulation Resistance

81%

Switching Frequency

UL60950-1 TUV EN60950-1 Approved

Environmental Specifications

Operating Temperature

-25°C to +70°C (See Derate Curve)

Storage Temperature

-40°C to +85°C, 10~95% RH

Relative Humidity

20 to +90% RH non cond

MTBF

265.9 KHrs min,MIL-HDBK-217F (25°C)

EMS

Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN60601-1-2, EN61000-6-2 (EN50082-2) heavy industry level, criteria A

Output Specifications

Output Voltage

5vdc/12vdc

Output Amps

6 Amps/3 Amps

Load Regulation

±0.5%/±5.0% (Note 4)

Line Regulation

±0.5%/±1.5% (Note 3)

Temperature Coefficient

0.03% / °C (0-50°C) on +5V output

Ripple and Noise

80mV pk-pk/120mV pk-pk (Note 1)

Over Voltage Protection

5Volts only: 5.75 ~ 6.75VDC Hiccup mode, auto recover

Over Current Protection

110 ~ 150% rated output power Hiccup mode, auto recover

DC Voltage Adjust (typ.)

5Volts only: 4.75 ~ 5.5Volts(DC)

Hold Up Time

50mS/230VAC, 12mS/115VAC

Physical Specifications

Size (mm)

129 x 98 x 38mm

Size (Inches)

5.08” x 3.86 ” x 1.50 ”

Weight (g)

440g

Weight (oz)

15.52oz

Notes

1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.