QP200 200w Power Supplies

200W Quad Output with PFC Function

	Universal AC input
	Built-in PFC function, PF >0.95
	Protections: Short circuit / Overload / Over voltage
	Fixed switching frequency at PFC:67KHz PWM:134KHz
	Forced air cooling by built-in DC fan
	With power good and fail output(Optional)

Model Number	Output Voltage	Output Amps	Ripple and Noise
QP200-D	5 Volts(DC)/12 Volts(DC)/24 Volts(DC)/-12 Volts(DC)	15 Amps/4.0 Amps/3.0 Amps/0.7 Amps	100mVpk-pk/150mVpk-pk/150mVpk-pk/150mVpk-pk (Note 1)
QP200-F	5 Volts(DC)/15 Volts(DC)/24 Volts(DC)/-15 Volts(DC)	15 Amps/3.0 Amps/3.0 Amps/0.7 Amps	100mVpk-pk/150mVpk-pk/150mVpk-pk/150mVpk-pk (Note 1)
QP200-3A	5 Volts(DC)/3.3 Volts(DC)/12 Volts(DC)/-5 Volts(DC)	15 Amps/15 Amps/6.0 Amps/0.7 Amps	100mVpk-pk/100mVpk-pk/150mVpk-pk/150mVpk-pk (Note 1)
QP200-3B	5 Volts(DC)/3.3 Volts(DC)/12 Volts(DC)/-12 Volts(DC)	15 Amps/15 Amps/6.0 Amps/0.7 Amps	100mVpk-pk/100mVpk-pk/150mVpk-pk/150mVpk-pk (Note 1)
QP200-3C	5 Volts(DC)/3.3 Volts(DC)/15 Volts(DC)/-15 Volts(DC)	15 Amps/15 Amps/5.0 Amps/0.7 Amps	100mVpk-pk/100mVpk-pk/150mVpk-pk/150mVpk-pk (Note 1)
QP200-3D	5 Volts(DC)/3.3 Volts(DC)/24 Volts(DC)/-12 Volts(DC)	10 Amps/15 Amps/4.0 Amps/0.7 Amps	100mVpk-pk/100mVpk-pk/150mVpk-pk/150mVpk-pk (Note 1)
QP200-3E	5 Volts(DC)/3.3 Volts(DC)/-24 Volts(DC)/-15 Volts(DC)	10 Amps/15 Amps/4.0 Amps/0.7 Amps	100mVpk-pk/100mVpk-pk/150mVpk-pk/150mVpk-pk (Note 1)

QP200 series

Input Specifications

Input Voltage Range	90-264VAC / 127-370 Volts(DC) (Note 4)
Input Reflected Ripple Current	3.5Amps max @115VAC, 2.0Amps max @230VAC
Frequency Range	47-63Hz
Inrush Current	30 Amps (cold start)

General Specifications

Isolation	4242VDC
Isolation Input-Ground	2121VDC
Isolation Output-Ground	707VDC
Insulation Resistance	73% typ.
Switching Frequency	UL60950-1 TUV EN60950-1 Approved

Environmental Specifications

Operating Temperature	-10°C to +60°C (See Derate Curve)
Storage Temperature	-20°C to +85°C, 10~95% RH
Relative Humidity	20 to +90% RH
MTBF	160.6K Hrs min, MIL-HDBK-217F (25°C)
EMS	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024 light industry level, criteria A

Notes

1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Size (mm)	215 x 115 x 50mm
Size (Inches)	8.46” x 4.53” x 1.97”
Weight (g)	1200g
Weight (oz)	42.33oz

Output Specifications

Physical Specifications

Output Voltage	5 Volts(DC)/12 Volts(DC)/24 Volts(DC)/-12 Volts(DC)
Output Amps	15 Amps/4.0 Amps/3.0 Amps/0.7 Amps
Load Regulation	±2.0%/±2.0%/±6.0%/±2.0%
Line Regulation	±1.0%/±1.0%/±2.0%/±1.0%
Temperature Coefficient	±0.03% / °C (0-50°C)
Ripple and Noise	100mVpk-pk/150mVpk-pk/150mVpk-pk/150mVpk-pk (Note 1)
Over Voltage Protection	5Volts(DC): 5.75~6.75Volts(DC), 3.3Volts(DC): 3.8~4.4Volts(DC), QP-150D: 12Volts(DC): 13.8~16.2Volts(DC), QP-150F: 17.25~20.25Volts(DC) Shutdown o/p voltage, re-power
Over Current Protection	105~150% rated output power, Constent Current limiting, auto recover
Over Temperature Protection	95°C±5°C (TSW1) detect of Q1,Q2, power transistor, Shutdown o/p voltage, re-power after cool down
DC Voltage Adjust (typ.)	5Volts(DC): 4.75~5.5Volts(DC), 3.3Volts(DC): 3.14~3.63Volts(DC), QP-200D(12Volts): 11.4~13.2Volts(DC), QP-200F(15Volts): 14.25~16.5Volts(DC)
Hold Up Time	24mS

Power Supply Search

QP200 200w Power Supplies