Order by phone: 1-800-823-8082 / +1-508-964-6300 M-F 8:30am to 5:30pm EST

PSP1500 1500 Watt Enclosed Power Supplies

1500W Single Output with PFC Function

AC input active surge current limiting

Protections:Short circuit/Over load/Over voltage/Over temperature

Built-in active PFC function

Built-in constant current limiting circuit

Built-in remote ON-OFF control

Built-in remote sense function

Model Number

Output Voltage

Output Amps

Load Regulation

Line Regulation

Ripple and Noise

Over Voltage Protection

DC Voltage Adjust (typ.)

Efficiency

PSP1500-5 5vdc 217.5A

±2.0%

±0.5%

100mVpk-pk

5.75~6.75Volt(DC) Shutdown o/p voltage, re-power

4.75~5.5Volt(DC)

0.77

PSP1500-12 12vdc 112.5A

±0.5%

±0.3%

150mVpk-pk

13.8~16.2Volt(DC) Shutdown o/p voltage, re-power

10~13.2Volt(DC)

0.84

PSP1500-13.5 13.5vdc 100.5A

±0.5%

±0.3%

150mVpk-pk

15.5~18.2Volt(DC) Shutdown o/p voltage, re-power

12~15Volt(DC)

0.84

PSP1500-15 15vdc 90A

±0.5%

±0.3%

150mVpk-pk

18~21Volt(DC) Shutdown o/p voltage, re-power

13.5~18Volt(DC)

0.84

PSP1500-24 24vdc 56.4A

±0.5%

±0.2%

150mVpk-pk

27.6~32.4Volt(DC) Shutdown o/p voltage, re-power

20~26.4Volt(DC)

0.85

PSP1500-27 27vdc 50.4A

±0.5%

±0.2%

150mVpk-pk

31~36.5Volt(DC) Shutdown o/p voltage, re-power

24~30Volt(DC)

0.85

PSP1500-48 48vdc 28.5A

±0.5%

±0.2%

200mVpk-pk

57.6~67.2Volt(DC) Shutdown o/p voltage, re-power

41~56Volt(DC)

0.86

PSP1500 series

Input Specifications

Input Voltage Range

176 ~ 264VAC 248~370vdc (Note 3)

Input Reflected Ripple Current

8.4 Amps@230VAC

Frequency Range

47-63Hz

Inrush Current

80 Amps/230VAC (cold start)

General Specifications

Isolation

4242VDC

Isolation Input-Ground

2121VDC

Isolation Output-Ground

707VDC

Insulation Resistance

77%

Switching Frequency

UL60950-1, TUV EN60950-1 Approved

Environmental Specifications

Operating Temperature

-10°C to +60°C (See Derate Curve)

Storage Temperature

-20°C to +85°C, 10~95% RH

Relative Humidity

20~90% RH non cond

MTBF

43.4KHrs min,MIL-HDBK-217F(25°C)

EMS

Compliance to EN61000-4-2,3,4,5,6,8,11 ENV50204, light Industry Level, Criteria A

Output Specifications

Output Voltage

5vdc

Output Amps

217.5A

Load Regulation

±2.0%

Line Regulation

±0.5%

Temperature Coefficient

±0.03% / °C (0-50°C)

Ripple and Noise

100mVpk-pk

Over Voltage Protection

5.75~6.75Volt(DC) Shutdown o/p voltage, re-power

Over Current Protection

115~140% rated output power, Constant Current limiting, auto-recov

Over Temperature Protection

95°C (TSW1) detect on heatsink of PFC MOSFET, 90°C (TSW2) detect the winding of output choke, Shutdown o/p voltage auto-recover after cool down

DC Voltage Adjust (typ.)

4.75~5.5Volt(DC)

Hold Up Time

24mS/230VAC typ.

Remore Shutdown

RC+/RC-: 0~0.8Volts(DC) =Power ON, 4~10Volts(DC) =Power Off sink curent <30mA

Physical Specifications

Size (mm)

278 x 129 x 190.5 mm

Size (Inches)

10.95”x 5.08”x 7.5”

Weight (g)

7400g

Weight (oz)

261.03oz

Notes

1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.