PQ100 100w Power Supplies

	Universal AC input
	Built-in active PFC function, PF>0.95
	Protections: Short circuit / Overload / Over voltage
	Cooling by free air convection
	Fixed switching frequency at 45KHz
	With power good signal output(Optional)

Model Number	Output Voltage	Output Amps	Minimum Load Requirement	Load Regulation	Ripple and Noise	Voltage Tolerance	Line Regulation	Efficiency
PQ-100B	5 Volts(DC)/12 Volts(DC)/-5 Volts(DC)/-12 Volts(DC)	10 Amps/3.5 Amps/0.5 Amps/0.5 Amps	2~10Amps/0.5~4.5Amps/0~1.0Amps/0~1.0Amps	±2.0%/±5.0%/ ±1.0%/±1.0%	80mVpk-pk/250mVpk-pk/80mVpk-pk/120mVpk-pk (note 1)	±3.0%/±12%/ ±6.0%/±6.0% (note 2)	±1.0%/±5.0%/ ±1.0%/±1.0%	72%
PQ-100C	5 Volts(DC)/15 Volts(DC)/-5 Volts(DC)/-15 Volts(DC)	8.0 Amps/3.5 Amps/0.5 Amps/0.5 Amps	2.0~8.0Amps/0.5~4.0Amps/0~1.0Amps/0~1.0Amps	±1.0%/±5.0%/ ±1.0%/±1.0%	80mVpk-pk/150mVpk-pk/80mVpk-pk/150mVpk-pk (note 1)	±2.0%/±6.0%/ ±6.0%/±6.0% (note 2)	±1.0%/±3.0%/ ±1.0%/±1.0%	74%
PQ-100D	5 Volts(DC)/12 Volts(DC)/24 Volts(DC)/-12 Volts(DC)	5.0 Amps/2.0 Amps/2.0 Amps/0.5 Amps	2.0~5.0Amps/0.5~4.5Amps/0.4~2.0Amps/0~1.0Amps	±1.0%/±5.0%/ ±5.0%/±1.0%	80mVpk-pk/120mVpk-pk/180mVpk-pk/120mVpk-pk (note 1)	±2.0%/±6.0%/ ±10%/±6.0% (note 2)	±1.0%/±3.0%/ ±1.0%/±1.0%	77%
PQ-100E	5 Volts(DC)/12 Volts(DC)/15 Volts(DC)/24 Volts(DC)	8.0 Amps/3.0 Amps/0.6 Amps/0.6 Amps	2.0~8.0Amps/0.5~3.0Amps/0~1.0Amps/0~1.0Amps	±1.0%/±5.0%/ ±1.0%/±1.0%	80mVpk-pk/120mVpk-pk/150mVpk-pk/120mVpk-pk (note 1)	±2.0%/±6.0%/ ±6.0%/±6.0% (note 2)	±1.0%/±3.0%/ ±1.0%/±1.0%	74%

PQ100 series

Input Specifications

Input Voltage Range	100-264VAC / 141-370 Volts(DC), (90~100VAC 90% load max)
Frequency Range	47~63Hz
Inrush Current	50 Amps (cold start)
Input Current	3.0Amps @115VAC, 1.5Amps @230VAC
Leakage Current	< 1.0mAmps / 240VAC
Power Factor Correction	PF >0.95 / 230VAC > 0.98 / 115VAC
Harmonic Input Current	Compliance to EN61000-3-2,-3

Environmental Specifications

Operating Temperature	-10°C to +50°C, 60°C with cooling FAN
Storage Temperature	-20°C to +85°C, 10~95% RH
EMI	Compliance to EN55022B (CISPR22B)
MTBF	258.6K Hrs min, MIL-HDBK-217F (25°C)
Vibration	10~500Hz, 2G10min./1cycle, period for 60min. each along X, Y, Z axes
Cooling	free air convection
EMS	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, light industry level, criteria A

General Specifications

Isolation	3000VAC
Isolation Input-Ground	1500VAC
Isolation Output-Ground	500VAC
Insulation Resistance	? 100M? / 500Volts(DC)
Efficiency	72%
Safety Approvals	UL60950-1, TUV EN60950-1 Approved

Output Specifications

Output Voltage	5 Volts(DC)/12 Volts(DC)/-5 Volts(DC)/-12 Volts(DC)
Output Amps	10 Amps/3.5 Amps/0.5 Amps/0.5 Amps
Minimum Load Requirement	2~10Amps/0.5~4.5Amps/0~1.0Amps/0~1.0Amps
Load Regulation	±2.0%/±5.0%/±1.0%/±1.0%
Line Regulation	±1.0%/±5.0%/±1.0%/±1.0%
Temperature Coefficient	±0.03% / °C (0-50°C)
Ripple and Noise	80mVpk-pk/250mVpk-pk/80mVpk-pk/120mVpk-pk (note 1)
Voltage Tolerance	±3.0%/±12%/±6.0%/±6.0% (note 2)
Over Voltage Protection	5Volts(DC): 5.75~6.75Volts(DC) Hiccup mode, auto-recover
Over Current Protection	105~135% rated output power Hiccup mode, auto-recover
Rise Time	1200mS, 50mS
Hold Up Time	80mS
DC Voltage Adjust (typ.)	5Vols(DC): 4.75~5.5Volts(DC)

Physical Specifications

Size (mm)	177.8 x 107.95 x 46 mm
Size (Inches)	7” x 4.25” x 1.81”
Weight (g)	560g
Weight (oz)	19.75oz

Notes

1. Ripple and Noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Power Supply Search

PQ100 100w Power Supplies