PMMK225D 225w Power Supplies

225 Watt DIN Rail Mountable Switching Power Supply with PFC

	225 Watts Output power
	Single Outputs
	Universal 90-264VAC Input
	4242VDC Input to Output Isolation
	Active Power Factor Correction

Model Number	Output Voltage	Output Amps	Ripple and Noise	Efficiency
PMMK225S-5D	5 VDC	40	100mV pk-pk (Notes 1, 4)	75% FL. Nom I/P
PMMK225S-12D	12 VDC	18.8	120mV pk-pk (Notes 1, 4)	82% FL. Nom I/P
PMMK225S-15D	15 VDC	15	150mV pk-pk (Notes 1, 4)	83% FL. Nom I/P
PMMK225S-24D	24 VDC	9.4	240mV pk-pk (Notes 1, 4)	84% FL. Nom I/P
PMMK225S-36D	36 VDC	6.25	360mV pk-pk (Notes 1, 4)	84% FL. Nom I/P
PMMK225S-48D	48 VDC	4.7	480mV pk-pk (Notes 1, 4)	84% FL. Nom I/P

PMMK225D series

Input Voltage Range	90-264 VAC (100-240VAC Nom.)
Frequency Range	47 ~ 63Hz
Inrush Current	30A @ 115VAC Cold Start, FL* 60A @ 230VAC Cold Start, FL* typ.
Input Current	3.8 Amps max., 90V I/P 1.3Amps max, 264V I/P
Leakage Current	<0.2mA, 240Vin, 50Hz
Power Factor Correction	0.95, min. Nom I/P, FL

Input Specifications

General Specifications

Isolation	5656VDC (Note 2)
Isolation Input-Ground	2121VDC (Note 2)
Isolation Output-Ground	707VDC (Note 2)
Insulation Resistance	?20M?
Efficiency	75% FL. Nom I/P
Safety Approvals	UL/cUL60601-1, EN60601-1 (TUV), EN60601-1-2:2001 (CE), IEC60601-1 (CB)

Environmental Specifications

Operating Temperature	-20 to +70°C (See Derate Curve)
Storage Temperature	-25 to +85°C
Working Humidity	10% to +95%,
Storage Humidity	5-95%
EMI	EN55022 Class B
MTBF	100,000 Hrs, min Mil Std 217F, 25°C
Vibration	4G Peak, 50-500Hz, 3 Axes
EMS	Harmonics Class D, 61000-3-2 Fluctuations 61000-3-3 ESD 61000-4-2 RS 61000-4-3 EFT 61000-4-4 Surge 61000-4-5 CS 61000-4-6 DIPS 61000-4-11
Drop Test	70 CM

Size (Inches)	3.86”W x 7”L x 1.57”H
Weight (g)	703g
Weight (oz)	1.55 lb,
Construction	Enclosed

Output Specifications

Physical Specifications

Notes

1. All measurements should be made directly at the terminals of the power supply.

2. Isolation for up to 1 minute duration.

3. Preset Accuracy measured at nominal load, 120VAC input.

4. O/P Noise measured directly at the pins/terminals at nominal load, 0.1uF ceramic bypass and 47uF electrolytic, pk-pk @ 20MHz bandwidth.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Output Voltage	5 VDC
Output Amps	40
Load Regulation	±1%, max. 10%-FL
Line Regulation	±1%, max. LL-HL
Ripple and Noise	100mV pk-pk (Notes 1, 4)
Over Voltage Protection	130% max. Auto Recovery
Over Current Protection	150% max. Auto Recovery
Short Circuit Protection	Auto Recover after fault condition is removed
Preset Accuracy	±1%, typ (2% 5 Vout) (Note 3)
Rise Time	<4S, <20mS, typ (Nom I/P, FL)
Hold Up Time	20mS, typ (Nom I/P, FL)
Over-Shoot	<10% of Nominal Output
Under-Shoot	<10% of Nominal Output
Remote Shutdown	Open Collector, Logic “1” = ON, “0” = Off. No Termination necessary to maintain constant “On” operation
Remote Sense	Compensates for up to 0.5V drop

Power Supply Search

PMMK225D 225w Switch Mode Power Supplies