Order by phone: 1-800-823-8082 / +1-508-964-6300 M-F 8:30am to 5:30pm EST

PMMK150U 150w Power Supplies

PMMK150U 150w Power Supplies

150 Watts Output Power

Single and Dual Outputs

Universal 90-264VAC Input

5VDC to 48VDC Outputs

4000VAC Input to Output Isolation

Active Power Factor Correction

Model Number

Output Voltage

Output Amps

Load Regulation

Line Regulation

Ripple and Noise

PMMK150S-5U

5 VDC

30 Amps

± 0.5%, typ (10%-FL, Note 7)

±0.5% (note 8)

100mV pk-pk (Notes 1, 3, 10)

PMMK150S-12U

12 VDC

12.5 Amps

± 0.5%, typ (10%-FL, Note 7)

±0.5% (note 8)

100mV pk-pk (Notes 1, 3, 10)

PMMK150S-15U

15 VDC

10 Amps

± 0.5%, typ (10%-FL, Note 7)

±0.5% (note 8)

100mV pk-pk (Notes 1, 3, 10)

PMMK150S-24U

24 VDC

6.3 Amps

± 0.5%, typ (10%-FL, Note 7)

±0.5% (note 8)

100mV pk-pk (Notes 1, 3, 10)

PMMK150S-48U

48 VDC

3.2 Amps

± 0.5%, typ (10%-FL, Note 7)

±0.5% (note 8)

100mV pk-pk (Notes 1, 3, 10)

PMMK150D-AU

5/12 VDC

15/7 Amps

±3/5%, typ (10%-FL, Note 7)

±0.5/1% (note 8)

50/100mV pk-pk (Notes 1, 3, 10)

PMMK150D-BU

5/24 VDC

15/3.5 Amps

±3/5%, typ (10%-FL, Note 7)

±0.5/2% (note 8)

50/200mV pk-pk (Notes 1, 3, 10)

PMMK150D-CU

12/24 VDC

7/3.5 Amps

±3/5%, typ (10%-FL, Note 7)

±1/2% (note 8)

100/200mV pk-pk (Notes 1, 3, 10)

PMMK150D-DU

12/48 VDC

7/1.5 Amps

±3/5%, typ (10%-FL, Note 7)

±1/4% (note 8)

100/400mV pk-pk (Notes 1, 3, 10)

PMMK150U series

Input Specifications

Input Voltage Range

90-264 VAC

Frequency Range

47-63 Hz

Inrush Current

30A @ 115VAC, 60A @ 230VAC *

Power Factor Correction

0.96 to 0.98

Environmental Specifications

Operating Temperature

-10 to +70°C (See Derate Curve)

EMC

EN55011 Class B

Storage Temperature

-25 to +85°C *

MTBF

270,000 Hrs, Mil Std 217, 25°C

General Specifications

Isolation

4000VAC (note 4)

Isolation Input-Ground

2000VAC (note 4)

Isolation Output-Ground

500 VAC (note 4)

Efficiency

75%, min.

Switching Frequency

67Khz, (fixed, typical)

Safety Approvals

UL,TUV, CB, CE

Output Specifications

Output Voltage

5 VDC

Output Amps

30 Amps

Load Regulation

± 0.5%, typ (10%-FL, Note 7)

Line Regulation

±0.5% (note 8)

Preset Accuracy

±1%, typ (note 9)

Temperature Coefficient

±0.05%/°C

Ripple and Noise

100mV pk-pk (Notes 1, 3, 10)

Over Voltage Protection

Latching, Auto Recover after fault condition is removed *

Short Circuit Protection

Latching, Auto Recover after fault condition is removed *

Hold Up Time

20mS, typ (Nom I/P, FL)

DC Voltage Adjust (typ.)

±6%, typ

Physical Specifications

Size (mm)

81.28 x 139.7 x 40.64 mm

Size (Inches)

3.2” x 5.5” x 1.6”

Construction

U-Channel

Weight (g)

544g

Weight (oz)

19.2oz

Notes

1. All measurements should be made directly at the terminals of the power supply

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.