MPD120 120 Watt Medically Approved Power Supplies

	Universal AC input
	Low leakage current ≤180 umA
	Protections: Short circuit / Overload / Over voltage
	Fixed switching frequency at 45KHz

Model Number	Output Voltage	Output Amps	Minimum Load Requirement	Load Regulation	Line Regulation	Ripple and Noise
MPD120-A	5 Volts (DC)/ 12 Volts (DC)	10 Amps/ 5 Amps	20%	±0.5%/ ±3.5%	±0.5%/±2.0%	80mV pk-pk/120mV pk-pk (note 1)
MPD120-B	5 Volts (DC)/ 12 Volts (DC)	10 Amps/ 2.9 Amps	20%	±0.5%/ ±4.0%	±0.5%/±2.0%	80mV pk-pk/250mV pk-pk (note 1)

MPD120 Dual Series

Model Number	Voltage Tolerance	Over Voltage Protection	Over Current Protection	Rise Time
MPD120-A	±2.0%/±7.0%	115~135% Output shutdown when activated auto recover	110~150% rated output power, auto recover	500mS, 20mS/230VAC / 1200mS. 30mS/115VAC
MPD120-B	±2.0%/±8.0%	115~135% Output shutdown when activated auto recover	110~150% rated output power, auto recover	500mS, 20mS/230VAC / 1200mS. 30mS/115VAC

Input Specifications

Input Voltage Range	90-264VAC / 127-370vdc
Frequency Range	47-440 Hz
Inrush Current	<22 Amps @ 115VAC Input, 45 Amps @ 230VAC (cold start)
Input Current	2.9 Amps max @ 115VAC 1.7 Amps max @ 230VAC
Leakage Current	0.18mA / 230 VAC
Harmonic Input Current	Compliance to EN61000-3-2,-3

Environmental Specifications

Operating Temperature	-20°C to +70°C (See Derate Curve)
Storage Temperature	-40°C to +85°C, 10~90% RH
Relative Humidity	20 to +90% RH
EMI	Compliance to EN55011B,EN55022B
MTBF	262.1KHrs min, MIL-HDBK-217F(25°C)
Vibration	10~500Hz, 2G10min./1cycle, period for 60min. each along X, Y, Z axes
EMS	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN60601-1-2, medical level, criteria A

General Specifications

Isolation	4000VAC
Isolation Input-Ground	1500VAC
Isolation Output-Ground	500VAC
Insulation Resistance	≥100MΩ
Efficiency	75% typ.
Safety Approvals	UL60601-1 / UL60950-1 TUV EN60601-1 / TUV EN60950-1 IEC60601-1 approved

Output Specifications

Output Voltage	3.3vdc
Output Amps	24 Amps
Minimum Load Requirement	0%
Load Regulation	±3.0%
Line Regulation	±1.0%
Temperature Coefficient	0.04% / °C (0-50°C)
Ripple and Noise	80mV pk-pk (note 1)
Voltage Tolerance	±3.0%
Peak Load	108% of output min. (note 3)
Rise Time	800mS, 20mS/230VAC / 2000mS, 50mS/115VAC
Hold Up Time	80mS @ 230VAC 14mS @ 115VAC

Physical Specifications

Size (mm)	177.8 x 107.95 x 35.5 mm
Size (Inches)	7” x 4.25” x 1.4”
Weight (g)	550g
Weight (oz)	14.40oz

Notes

1. Ripple and Noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor.

2. Tolerance: includes set up tolerance, line regulation and load regulation.

3. 33% Duty cycle max within every 30S. Average output power should not exceed the rated power.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

MPD120 120 Watt Medically Approved Power Supplies

Power Supply Search