Order by phone: 1-800-823-8082 / +1-508-964-6300 M-F 8:30am to 5:30pm EST

LPV60 60 Watt LED/Lighting Power Supplies

60W Single Output Class 2 Switching Power Supply

Constant voltage design

Universal AC input

Protections: Short circuit / Overload / Over voltage

Epoxy encapsulated with IP67 level

Cooling by free air convection

Suitable for LED lighting and moving sign applications

Model Number

Output Voltage

Output Amps

Ripple and Noise

Over Voltage Protection

Efficiency

LPV60-5

5vdc

8 Amps

80mV pk-pk (Note 1)

5.75~6.75vdc Shut down o/p voltage,re-power

76%

LPV60-12

12vdc

5 Amps

120mV pk-pk (Note 1)

13.8~16.2vdc Shut down o/p voltage,re-power

83%

LPV60-15

15vdc

4 Amps

120mV pk-pk (Note 1)

17.25~20.25vdc Shut down o/p voltage,re-power

83%

LPV60-24

24vdc

2.5 Amps

150mV pk-pk (Note 1)

27.6~32.4vdc Shut down o/p voltage,re-power

86%

LPV60-36

36vdc

1.67 Amps

150mV pk-pk (Note 1)

41.4~48.6vdc Shut down o/p voltage,re-power

86%

LPV60-48

48vdc

1.25 Amps

150mV pk-pk (Note 1)

55.2~64.8vdc Shut down o/p voltage,re-power

86%

LPV-60 series

Input Specifications

Input Voltage Range

90-264VAC

Input Current

1.2 Amps @ 115VAC; 1.0 Amps @ 230VAC

Frequency Range

47-63 Hz

Inrush Current

30Amps/115VAC ; 60Amps/230VAC

Leakage Current

0.25mAmps/240VAC

General Specifications

Isolation

3KVAC Input/Output

Efficiency

76%

Safety Approvals

UL1310 Class 2, CAN/CSA C22.2 No 223-M91 (except for 5V, 48V) design refer to TUV EN60950-1, EN61347-2-13

Insulation Resistance

I/P-O/P >100M? / 500VDC / 25°C/70%RH

EMI

Compliance to EN55022 (CISPR22) Class B

EMS

Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN55024 light industry level, criteria A

Harmonic Current

Compliance to EN61000-3-2,-3

Environmental Specifications

Operating Temperature

-30°C to +70°C (See Derate Curve)

Storage Temperature

-40°C to +80°C, 10~95% RH

Relative Humidity

20~90% RH non cond

MTBF

732KHrs min, MIL-HDBK-217F (25°C)

Vibration

10~500Hz, 2G 10min./1cycle, preiod for 60min. each along X,Y, Z axes

Cooling

free air convection

IP Rating

IP67

Temperature Coefficient

±0.03%/°C (0~50°C)

Output Specifications

Output Voltage

5vdc

Output Amps

8 Amps

Load Regulation

5Volts(DC) only: ±6.0% 12~36Volts(DC): ±2.0%

Line Regulation

±1.0%

Ripple and Noise

80mV pk-pk (Note 1)

Over Voltage Protection

5.75~6.75vdc Shut down o/p voltage,re-power

Over Current Protection

110~150% rated output power Hiccup mode, auto recov after fault condition is removed (Note 3)

Hold Up Time

50ms/230VAC ; 16ms/115VAC

Rise Time

5~36Volts(DC) 500ms, 20ms /230VAC/115VAC; 48Volts(DC) 500ms, 30ms/230VAC/115VAC

Voltage Tolerance

5Volts(DC) only: ±8.0% 12~36Volts(DC): ±5.0% (Note 2)

Physical Specifications

Size (mm)

162.5 x 42.5 x 32 mm

Size (Inches)

6.4” x 1.67” x 1.26”

Weight (g)

400g

Weight (oz)

14.11 oz

Notes

1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

2. Tolerance : includes set up tolerance, line regulation and load regulation.

3. Derating may be needed under low input voltage. Please check the derating curve for more details.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.