LED Lighting Drivers: LPV35 35w Power Supplies

35W Single Output Class 2 Switching Power Supply

	Constant voltage design
	Universal AC input
	Protections: Short circuit / Overload / Over voltage
	Epoxy encapsulated with IP67 level
	Cooling by free air convection
	Suitable for LED lighting and moving sign applications

Model Number	Output Voltage	Output Amps	Ripple and Noise	Over Voltage Protection	Efficiency
LPV35-5	5 Volts(DC)	5 Amps	80mV pk-pk (Note 3)	5.75~6.75 Volts(DC) Shut down o/p voltage,re-power	77%
LPV35-12	12 Volts(DC)	3 Amps	120mV pk-pk (Note 3)	13.8~16.2 Volts(DC) Shut down o/p voltage,re-power	84%
LPV35-15	15 Volts(DC)	2.4 Amps	120mV pk-pk (Note 3)	17.25~20.25 Volts(DC) Shut down o/p voltage,re-power	84%
LPV35-24	24 Volts(DC)	1.5 Amps	150mV pk-pk (Note 3)	27.6~32.4 Volts(DC) Shut down o/p voltage,re-power	85%
LPV35-36	36 Volts(DC)	1 Amps	150mV pk-pk (Note 3)	41.4~48.6 Volts(DC) Shut down o/p voltage,re-power	85%

LPV-35 series

Input Specifications

Input Voltage Range	90-264VAC
Input Current	1.1 Amps @ 115VAC; 0.7 Amps @ 230VAC
Frequency Range	47-63 Hz
Inrush Current	30Amps/115VAC ; 60Amps/230VAC
Leakage Current	0.25mAmps/240VAC

General Specifications

Isolation	3KVAC Input/Output
Efficiency	77%
Safety Approvals	UL1310 Class 2, CAN/CSA C22.2 No 223-M91 design refer to TUV EN60950-1, EN61347-2-13
Insulation Resistance	I/P-O/P >100M? / 500VDC / 25°C/70%RH
EMI	Compliance to EN55022 (CISPR22) Class B
EMS	Compliance to EN61000-4-2,3,4,6,8,11; ENV50204; EN55024 light industry level, criteria A
Harmonic Current	Compliance to EN61000-3-2

Environmental Specifications

Operating Temperature	-30°C to +75°C (See Derate Curve)
Storage Temperature	-40°C to +80°C, 10~95% RH
Relative Humidity	20~90% RH non cond
MTBF	743.5KHrs min, MIL-HDBK-217F (25°C)
Vibration	10~500Hz, 2G 10min./1cycle, preiod for 60min. each along X,Y, Z axes
Cooling	free air convection
IP Rating	IP67
Temperature Coefficient	±0.03%/°C (0~50°C)

Output Specifications

Output Voltage	5 Volts(DC)
Output Amps	5 Amps
Load Regulation	5Volts(DC) only: ±4.0% 12~36Volts(DC): ±2.0%
Line Regulation	±1.0%
Ripple and Noise	80mV pk-pk (Note 3)
Over Voltage Protection	5.75~6.75 Volts(DC) Shut down o/p voltage,re-power
Over Current Protection	110~150% rated output power Hiccup mode, auto recov after fault condition is removed (Note 3)
Hold Up Time	50ms/230VAC ; 16ms/115VAC
Rise Time	500ms, 20ms /230VAC/115VAC
Voltage Tolerance	5Volts(DC) only: ±6.0%; 12~36Volts(DC): ±5.0% (Note 2)

Physical Specifications

Size (mm)	148 x 40 x 30 mm
Size (Inches)	5.83” x 1.57” x 1.18”
Weight (g)	340g
Weight (oz)	11.99 oz

Notes

1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

2. Tolerance : includes set up tolerance, line regulation and load regulation.

3. Derating may be needed under low input voltage. Please check the derating curve for more details.

4. LPV-35-5 can provide 6A of output current continuously. Based on the requirement of UL1310 class 2, the output current is only certified up to 5A for the test report of LPV-35-5.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Power Supply Search

LPV35 35w LED/Lighting Power Supplies