Order by phone: 1-800-823-8082 / +1-508-964-6300 M-F 8:30am to 5:30pm EST

LPC35 35w Constant Current Encapsulated LED/Lighting Power Supplies

35W Single Output LED Lighting Power Supply

Constant current design

Universal AC input

Epoxy encapsulated with IP67 level

Protections: Over current / Over voltage

Fully isolated plastic case

Cooling by free air convection

Model Number

Output Voltage

Output Amps

Over Voltage Protection

LPC-35-700

48 Volts(DC)

.7 Amps

50.4~60 Volts(DC) Shut off o/p voltage, clamping by zener diode

LPC-35-1050

30 Volts(DC)

1.05 Amps

31.5~40.5 Volts(DC) Shut off o/p voltage, clamping by zener diode

LPC-35-1400

24 Volts(DC)

1.4 Amps

27.6~32.4 Volts(DC) Shut off o/p voltage, clamping by zener diode

LPC-35 series

Input Specifications

Input Voltage Range

90-264VAC

Input Current

1.1 Amps max @ 115VAC; 0.7 Amps max @ 230VAC

Frequency Range

47-63 Hz

Inrush Current

30 Amps @ 115VAC max; 60 Amps @ 230VAC max

Leakage Current

0.25 mAmps @ 240VAC

General Specifications

Isolation

3000VAC I/P-O/P

Efficiency

85% typ.

Safety Approvals

UL1310 Class 2, CAN/CSA C22.2 No. 223-M91 (except for 48Volts) design refer to TUV EN60950-1, EN61347-2-13

Insulation Resistance

I/P-O/P > 100M? / 500VDC /25°C/70% RH

EMI

Compliance to EN55022B (CISPR22B)

EMS

Compliance to EN61000-4-2,3,4,6,8,11; ENV50204, EN55024, light industry level criteria A

Harmonic Current

Compliance to EN610000-3-2,-3

Environmental Specifications

Operating Temperature

-30°C to +75°C (See Derate Curve)

Storage Temperature

-40°C to +80°C, 10~95% RH

Relative Humidity

20~90% RH non cond

MTBF

743.5KHrs min, MIL-HDBK-217F (25°C)

Vibration

10~500Hz, 2G 10 min./1cycle, period for 60min. each along X, Y. Z axes

Cooling

free air convection

IP Rating

IP67

Temperature Coefficient

±0.03%/°C (0~50 °C)

Output Specifications

Output Voltage

48 Volts(DC)

Output Amps

.7 Amps

Load Regulation

±2.0%

Line Regulation

±1.0%

Ripple and Noise

200 mVpk-pk max (Note 1)

Over Voltage Protection

50.4~60 Volts(DC) Shut off o/p voltage, clamping by zener diode

Over Current Protection

5% rated output current Constant current limiting type (Note 3)

Hold Up Time

50mS @ 230VAC typ; 16mS @ 115VAC typ

Rise Time

500mS. 120mS/230VAC; 500mS,120mS/115VAC

Voltage Tolerance

±5.0% (Note 2)

Physical Specifications

Size (mm)

148 x 40 x 30 mm

Size (Inches)

5.83” x 1.57” x 1.18”

Weight (g)

340g

Weight (oz)

11.99 oz

Notes

1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

2. Tolerance : includes set up tolerance, line regulation and load regulation.

3. Derating may be needed under low input voltage. Please check the derating curve for more details.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.