LED Driver

	High Efficiency (Up to 92%)
	Active Power Factor Correction (typ 0.99)
	Constant Output Current
	Waterproof (IP67)
	All-Round Protection: OVP, SCP, OTP
	Comply with UL8750 & EN61347 Safety Regulations

Model Number	Output Voltage	Output Amps	Over Voltage Protection	Efficiency
ELP75-12214	214 Volts(DC)	0.35Amps	250 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again	92%
ELP75-12166	166 Volts(DC)	0.45Amps	200 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again	92%
ELP75-12108	108 Volts(DC)	0.7Amps	130 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again	91%
ELP75-1272	72Volts(DC)	1.05Amps	85 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again	90%
ELP75-1254	54 Volts(DC)	1.4 Amps	65 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again	90%
ELP75-1236	36 Volts(DC)	2.1 Amps	48 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again	89%
ELP75-1227	27 Volts(DC)	2.8 Amps	35 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again	89%
ELP75-1220	20 Volts(DC)	3.75 Amps	26 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again	88%
ELP75-1215	15 Volts(DC)	5.0 Amps	20 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again	88%

ELP75 series

Input Specifications

Input Voltage Range	90-305VAC
Input Current	0.9 Amps max @ 100VAC; 0.45 Amps max @ 220VAC
Frequency Range	47-63 Hz

General Specifications

Efficiency	92%
Safety Approvals	CUL USA & Canada UL8750, compliance to UL13102, UL1012, UL953, CAN/CSA-C22.2 No. 0, CSA-C22.2 No 107.1, CSA-C22.2 No. 250.0; CE Europe EN61347-1, EN61347-2-13
EMI	EN55015
EMS	Compliance to EN61000-4-2,3,4,5,6,8,11; EN61000-3-2,3 EN61547

Environmental Specifications

Operating Temperature	-25°C to +70°C 10~100% RH
Storage Temperature	-40°C to +80°C, 10~95% RH
MTBF	300KHrs min, MIL-HDBK-217F (25°C) / 110VAC
Life Time	100KHrs @ 25°C
IP Rating	IP67

Output Specifications

Output Voltage	214 Volts(DC)
Output Amps	0.35Amps
Load Regulation	3.0% max
Line Regulation	1.0% max
Ripple and Noise	2% pk-pk / 20MHz 0.1uF ceramic capacitor 10uF eletrolytic capacitor
Start Up	3 S max
Overshoot	10% When power on or off
Undershoot	10% When power on or off
Over Voltage Protection	250 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again
Over Temperature Protection	110°C max temperature of components inside the case
Short Circuit Protection	No damage shall occur when any output operating in a short circuit condition. The power supply shall be self-recovery when the fault condition is removed

Physical Specifications

Size (mm)	150 x 67.5 x37 mm
Size (Inches)	5.91” x 2.66” x 1.46”
Weight (g)	750g
Weight (oz)	26.45 oz

Notes

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Power Supply Search

ELP75 75w Constant Current LED/Lighting Power Supplies

LED Driver