40W LED Driver

	High Efficiency (Up to 88%)
	Active Power Factor Correction (typ 0.94)
	Constant Output Current
	Waterproof (IP66)
	All-Round Protection: OVP, SCP, OLP
	Comply with UL1310 & EN61347-1 Regulations
	Optional Dimmer Control Feature
	Lightning Protection

Model Number	Output Voltage	Output Amps	Over Voltage Protection	Efficiency
ELP40-1211D ELP40-1211P	11vdc	3.497 Amps	15vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	84%
ELP40-1216D ELP40-1216P	16vdc	2.331 Amps	21vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	85%
ELP40-1223D ELP40-1223P	23vdc	1.743 Amps	28vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	86%
ELP40-1225D ELP40-1225P	25vdc	1.47 Amps	31vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	87%
ELP40-1229D ELP40-1229P	29vdc	1.344 Amps	31vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	87%
ELP40-1236D ELP40-1236P	36vdc	1.103 Amps	38vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	87%
ELP40-1254D ELP40-1254P	54vdc	0.735 Amps	59vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	87%
ELP40-1289D ELP40-1289P	89vdc	0.473 Amps	95vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	88%
ELP40-12114D ELP40-12114P	114Volts(DC)	0.368 Amps	124vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	89%
*Note: (D) denotes choice of receiving this product WITH a Dimmer control Feature. (P) denotes the choice of receiving this product WITHOUT the Dimmer Control Feature.

ELP40 series

Input Specifications

Input Voltage Range	90-305VAC
Input Current	0.48 Amps max @ 100VAC; 0.23 Amps max @ 220VAC
Frequency Range	47-63 Hz

General Specifications

Efficiency	See Selection Chart Above
Safety Approvals	USA & Canada UL8750 Compliance to UL1310 Class 2, UL1012, UL935, CAN/CSA C22.2 No. 0, CSA-C22.2 No. 107.1, CSA-C22.2 No. 250.0; CE Europe EN61347-1, EN61347-2-13
EMI	EN55015
EMS	Compliance to EN61000-4-2,3,4,6,8,11; EN61000-3-2,3 EN61547
No Load Power Consumption	≤6.0W

Environmental Specifications

Operating Temperature	-20°C to + 70°C 10~100% RH (See Derate Curve)
Storage Temperature	-40°C to +85°C, 5~100% RH
MTBF	487 KHrs min @ 80% load, MIL-HDBK-217F (25°C) / 110VAC
Life Time	77,000 Hrs; 110VAC, 45°C, 80% Load
IP Rating	IP66

Output Specifications

Output Voltage	See Selection Chart Above
Output Amps	See Selection Chart Above
Load Regulation	5.0%
Line Regulation	2.0%
Ripple and Noise	10% pk-pk / 20MHz bandwidth, 0.1uF ceramic capacitor 10uF eletrolytic capacitor
Turn-on Delay Time	1.7S @ 110VAC
Overshoot	10% When power on or off
Undershoot	10% When power on or off
Over Voltage Protection	See Selection Chart Above
Short Circuit Protection	No damage shall occur when any output operating in a short circuit condition. The power supply shall be self-recovery when the fault condition is removed

Physical Specifications

Size (mm)	95 x 70 x 32 mm
Size (Inches)	3.74” x 2.76” x 1.26”
Weight (g)	300g
Weight (oz)	10.58 oz

Notes

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

11-36 Volt outputs are Class 2 U.S. and Canada; The 54 Volt output is Class 2 U.S. only; All others are NOT Class 2.

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

ELP40 40 Watt Constant Current LED/Lighting Power Supplies

40W LED Driver

Power Supply Search