25W LED Driver

	High Efficiency (Up to 84%)
	Active Power Factor Correction (typ 0.94)
	Constant Output Current
	Waterproof (IP66)
	All-Round Protection: OVP, SCP, OTP
	Comply with UL8750 & EN61347 Regulations
	Optional Dimmer Control Feature

Model Number	Output Voltage	Output Amps	Over Voltage Protection	Efficiency
ELP25-1212D ELP25-1212P	12vdc	2.184 Amps	13vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	80%
ELP25-1214D ELP25-1214P	14vdc	1.838 Amps	16vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	80%
ELP25-1818D ELP25-1818P	18vdc	1.47 Amps	21vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	82%
ELP25-1224D ELP25-1224P	24vdc	1.103 Amps	26vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	82%
ELP25-1236D ELP25-1236P	36vdc	0.735 Amps	42vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	83%
ELP25-1240D ELP25-1240P	40Volts(DC)	0.651 Amps	44vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	83%
ELP25-1256D ELP25-1256P	56vdc	0.473 Amps	59vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	84%
ELP25-1272D ELP25-1272P	72vdc	0.368 Amps	82vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	84%
*Note: (D) denotes choice of receiving this product WITH a Dimmer control Feature. (P) denotes the choice of receiving this product WITHOUT the Dimmer Control Feature.

ELP25 series

Input Specifications

Input Voltage Range	90-305VAC
Input Current	0.32 Amps max @ 100VAC; 0.15 Amps max @ 220VAC
Frequency Range	47-63 Hz

General Specifications

Efficiency	See Selection Chart
Safety Approvals	USA & Canada UL8750 Compliance to UL1310 Class 2, UL1012, UL935, CAN/CSA C22.2 No. 0, CSA-C22.2 No. 107.1, CSA-C22.2 No. 250.0; CE Europe EN61347-1, EN61347-2-13
EMI	EN55015
EMS	Compliance to EN61000-4-2,3,4,6,8,11; EN61000-3-2,3 EN61547
No Load Power Consumption	≤0.5W

Environmental Specifications

Operating Temperature	-20°C to + 70°C 10~100% RH (See Derate Curve)
Storage Temperature	-40°C to +85°C, 5~100% RH
MTBF	484KHrs min @80% Load, MIL-HDBK-217F (25°C) / 110VAC
Life Time	79,000 Hrs @ 25°C, 80% Load
IP Rating	IP66

Output Specifications

Output Voltage	See Selection Chart Above
Output Amps	See Selection Chart Above
Load Regulation	5.0%
Line Regulation	2.0%
Ripple and Noise	25% pk-pk / 20MHz bandwidth 0.1uF ceramic capacitor 10uF eletrolytic capacitor
Turn-on Delay Time	1.7S @ 110VAC
Overshoot	10% When power on or off
Undershoot	10% When power on or off
Over Voltage Protection	See Selection Chart Above; Hiccup mode. Auto-recover.
Short Circuit Protection	No damage shall occur when any output operating in a short circuit condition. The power supply shall self-recover when the fault condition is removed

Physical Specifications

Size (mm)	78 x 380 x 28 mm
Size (Inches)	3.07” x 3.15” x 0.98”
Weight (g)	200g
Weight (oz)	7.05 oz

Notes

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

12-36 Volt outputs are Class 2 U.S. and Canada; The 40 Volt output is Class 2 U.S. ONLY; All others are NOT Class 2.

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

ELP25 25 Watt Constant Current LED/Lighting Power Supplies

25W LED Driver

Power Supply Search