Order by phone: 1-800-823-8082 / +1-508-964-6300 M-F 8:30am to 5:30pm EST

ELP150 150w Constant Current LED/Lighting Power Supplies

150W LED Driver

Ultra High Efficiency (Up to 93%)

Active Power Factor Correction (typ 0.99)

Constant Output Current

Waterproof (IP67)

All-Round Protection: OVP, SCP, OTP

Comply with Worldwide Safety & EMC Regulations

Model Number

Output Voltage

Output Amps

Over Voltage Protection

Efficiency

ELP150-12428

428 Volts(DC)

0.35Amps

514 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again

93%
ELP150-12333

333 Volts(DC)

0.45Amps

400 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again

93%

ELP150-12214

214 Volts(DC)

0.7 Amps

257 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again

93%

ELP150-12142

142 Volts(DC)

1.05 Amps

170 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again

93%

ELP150-12107

107 Volts(DC)

1.4 Amps

128 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again

92%

ELP150-1285

85 Volts(DC)

1.75 Amps

102 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again

92%

ELP150-1271

71 Volts(DC)

2.1 Amps

85 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again

92%

ELP150-1261

61 Volts(DC)

2.45 Amps

73 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again

92%

ELP150-1253

53 Volts(DC)

2.8 Amps

64 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again

92%

ELP150-1247

47 Volts(DC)

3.15 Amps

56 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again

93%

ELP150-1242

42 Volts(DC)

3.5 Amps

50 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again

93%

ELP150-1235

35 Volts(DC)

4.2 Amps

42 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again

91%

ELP150-1230

30 Volts(DC)

4.9 Amps

36 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again

91%

ELP150-1225

25 Volts(DC)

5.95 Amps

30 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again

91%

ELP150 series

Input Specifications

Input Voltage Range

90-305VAC

Input Current

1.8 Amps max @ 100VAC; 0.9 Amps max @ 220VAC

Frequency Range

47-63 Hz

General Specifications

Efficiency

up to 93%

Safety Approvals

USA & Canada UL8750, compliance to UL1012 UL935, CAN/CSA-C22.2 No. 0, 107.1, CSA-C22.2 No. 250.0; CE Europe EN61347-1, EN61347-2-13

EMI

EN55015

EMS

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61000-3-2,3 EN61547

Environmental Specifications

Operating Temperature

-35°C to +70°C 10~100% RH (See Derate Curve)

Storage Temperature

-40°C to +85°C, 5~100% RH

MTBF

450 000KHrs min, MIL-HDBK-217F (25°C) / 110VAC

Life Time

100,000 Hrs @ 25°C

IP Rating

IP67

Output Specifications

Output Voltage

30 ~ 514 Volts(DC)

Output Amps

5.95 - 0.35Amps

Load Regulation

3.0%

Line Regulation

1.0%

Ripple and Noise

3% pk-pk / 20MHz 0.1uF ceramic capacitor 10uF eletrolytic capacitor

Start Up

2 S

Overshoot

10% When power on or off

Undershoot

10% When power on or off

Over Voltage Protection

513 Volts(DC) Latch mode. The power supply shall return to normal operation only after the power is turn-on again

Over Temperature Protection

110°C max temperature of components inside the case

Short Circuit Protection

No damage shall occur when any output operating in a short circuit condition. The power supply shall be self-recovery when the fault condition is removed

Physical Specifications

Size (mm)

214 x 67.5 x 42 mm

Size (Inches)

8.43” x 2.66” x 1.65”

Weight (g)

1000g

Weight (oz)

35.27 oz

Notes

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.