100W LED Driver

	Ultra High Efficiency (Up to 90%)
	Active Power Factor Correction (typ 0.99)
	Constant Output Current
	Waterproof (IP67)
	All-Round Protection: OVP, SCP, OTP
	Comply with Worldwide Safety & EMC Regulations

Model Number	Output Voltage	Output Amps	Over Voltage Protection	Size (mm)	Efficiency
ELP100-12286	286vdc	0.368 Amps	343vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	187 x 66.5 x 42 mm	93%
ELP100-12222	222vdc	0.473 Amps	266vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	187 x 66.5 x 42 mm	93%
ELP100-12143	143vdc	0.735 Amps	131vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	187 x 66.5 x 42 mm	93%
ELP100-1295	95vdc	1.102 Amps	114vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	187 x 66.5 x 42 mm	92%
ELP100-1272	72vdc	1.47 Amps	86vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	187 x 66.5 x 42 mm	92%
ELP100-1257	57vdc	1.837 Amps	68vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	187 x 66.5 x 42 mm	92%
ELP100-1248	48vdc	2.205 Amps	57vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	187 x 66.5 x 42 mm	92%
ELP100-1241	41vdc	2.572 Amps	49vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	194 x 66.5 x 42 mm	92%
ELP100-1236	36vdc	2.94 Amps	43vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	194 x 66.5 x 42 mm	92%
ELP100-1232	32vdc	3.307 Amps	38vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	194 x 66.5 x 42 mm	92%
ELP100-1228	28vdc	3.748 Amps	33vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	194 x 66.5 x 42 mm	92%
ELP100-1224	24vdc	4.410 Amps	28vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again	194 x 66.5 x 42 mm	92%

ELP100 series

Input Specifications

Input Voltage Range	90-305VAC
Input Current	1.3 Amps max @ 100VAC
Frequency Range	47-63 Hz

General Specifications

Efficiency	up to 93%
Safety Approvals	USA & Canada: UL8750Complianace to UL1310 Class 2, UL1012, UL935, CAN/CSA-C22.2 No 107.1, CSA-C22.2 No 250.0; CE Europe: EN61347-1, EN61347-2-13
EMI	EN55015, Conducted & Radiated emission test with 6dB margin
EMS	Compliance to EN61000-4-2,3,4,5,6,8,11; EN61000-3-2,3 EN61547

Environmental Specifications

Operating Temperature	-35°C to +70°C 10~100% RH (See Derate Curve)
Storage Temperature	-40°C to +85°C, 5~100% RH
Life Time	104,000 Hrs @ 45°C
IP Rating	IP67

Output Specifications

Output Voltage	24 ~ 286vdc
Output Amps	0.35Amps
Load Regulation	3.0%
Line Regulation	1.0%
Ripple and Noise	3% pk-pk / 20MHz 0.1uF ceramic capacitor 10uF eletrolytic capacitor
Over Voltage Protection	343vdc Latch mode. The power supply shall return to normal operation only after the power is turn-on again
Over Temperature Protection	110°C max temperature of components inside the case
Short Circuit Protection	No damage shall occur when any output operating in a short circuit condition. The power supply shall be self-recovery when the fault condition is removed

Physical Specifications

Size (mm)	194 x 67.5 x 37 mm
Size (Inches)	7.64” x 2.66” x 1.46”
Weight (g)	1000g
Weight (oz)	35.27 oz

Notes

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

ELP100 100 Watt Constant Current LED/Lighting Power Supplies

100W LED Driver

Power Supply Search