LED Lighting Drivers: ELN60 60w Power Supplies - Switch Mode Constant Current

60W Single Output Class 2 Switching Power Supply

	Universal AC input / Full range
	Fully isolated plastic case with IP64 level
	Built-in constant current limiting circuit with adjustable OCP level
	Protections: Overload / Over voltage
	UL1310 Class 2 power unit
	Cooling by free air convection

Model Number	Output Voltage	Output Amps	DC Voltage Adjust (typ.)	Ripple and Noise	Over Voltage Protection	Current Adjustment Range	LED Voltage Operation	Efficiency
ELN60-9 ELN60-9D ELN60-9P	9 Volts(DC)	5 Amps	8.7~10.5 Volts(DC) Can be adjusted by internal potential meter SVR1 (Note 4)	120 mV pk-pk (Note 1)	11~13.5 Volts(DC) Shut down o/p voltage, re-power	-25%~3%. Can be adjusted by internal potential meter SVR2	3~9Volts (Note 5)	82%
ELN60-12 ELN60-12D ELN60-12P	12 Volts(DC)	5 Amps	10.8~13.2 Volts(DC) Can be adjusted by internal potential meter SVR1 (Note 4)	120 mV pk-pk (Note 1)	13.8~16 Volts(DC) Shut down o/p voltage, re-power	-25%~3%. Can be adjusted by internal potential meter SVR3	3~12Volts (Note 5)	85%
ELN60-15 ELN60-15D ELN60-15P	15 Volts(DC)	4 Amps	13.5~16.5 Volts(DC) Can be adjusted by internal potential meter SVR1 (Note 4)	150 mV pk-pk (Note 1)	17.5~21 Volts(DC) Shut down o/p voltage, re-power	-25%~3%. Can be adjusted by internal potential meter SVR4	3~15Volts (Note 5)	86%
ELN60-24 ELN60-24D ELN60-24P	24 Volts(DC)	2.5 Amps	21.6~26.4 Volts(DC) Can be adjusted by internal potential meter SVR1 (Note 4)	150 mV pk-pk (Note 1)	28~32 Volts(DC) Shut down o/p voltage, re-power	-25%~3%. Can be adjusted by internal potential meter SVR5	3~24Volts (Note 5)	87%
ELN60-27 ELN60-27D ELN60-27P	27 Volts(DC)	2.3 Amps	24.3~29.7 Volts(DC) Can be adjusted by internal potential meter SVR1 (Note 4)	200 mV pk-pk (Note 1)	31~35 Volts(DC) Shut down o/p voltage, re-power	-25%~3%. Can be adjusted by internal potential meter SVR6	3~27Volts (Note 5)	87%
ELN60-48 ELN60-48D ELN60-48P	48 Volts(DC)	1.3 Amps	43.2~52.8 Volts(DC) Can be adjusted by internal potential meter SVR1 (Note 4)	250 mV pk-pk (Note 1)	54~60 Volts(DC) Shut down o/p voltage, re-power	-25%~3%. Can be adjusted by internal potential meter SVR7	3~48Volts (Note 5)	88%
*This product is available with a Dimmer Control feature. There are 2 types of dimmer controls: 1. 1.1~10VDC Control ("D" Type) 2. PWM control ("P" Type)

ELN60 series

Input Specifications

Input Voltage Range	90-264VAC
Input Current	1.2 Amps max @ 115VAC; 0.7 Amps max @ 230VAC
Frequency Range	47-63 Hz
Inrush Current	60Amps/230VAC
Leakage Current	0.25mAmps/240VAC
DC Voltage Adjust (typ.)	8.7~10.5 Volts(DC) Can be adjusted by internal potential meter SVR1 (Note 4)

General Specifications

Isolation	3 KVAC Input/Output
Efficiency	82%
Safety Approvals	UL1310 Class 2, CAN/CSA C22.2 No. 223-M91 (except for 48Volts) design refer to TUV EN60950-1, EN61347-2-13
Insulation Resistance	I/P-O/P >100M? / 500VDC / 25°C/70%RH
EMI	Compliance to EN55022(CISPR22) Class B
EMS	Compliance to EN61000-4-2,3,4,6,8,11; ENV50204; EN55024 light industry level, criteria A
Harmonic Current	Compliance to EN61000-3-2,-3

Environmental Specifications

Operating Temperature	-20°C to +60°C (See Derate Curve)
Storage Temperature	-40°C to +85°C, 10~95% RH
Relative Humidity	20~90% RH non cond
MTBF	603KHrs min, MIL-HDBK-217F (25°C)
Vibration	10~500Hz, 2G 10min./1cycle, preiod for 60min. each along X,Y, Z axes
Cooling	free air convection
IP Rating	IP64
Temperature Coefficient	±0.03%/°C (0~50°C)

Output Specifications

Output Voltage	9 Volts(DC)
Output Amps	5 Amps
Dimming Range	1~10Volts(DC) or PWM signal:100Hz~3KHz (optional)
Load Regulation	±2.0%
Line Regulation	±1.0%
Ripple and Noise	120 mV pk-pk (Note 1)
Over Voltage Protection	11~13.5 Volts(DC) Shut down o/p voltage, re-power
Current Adjustment Range	-25%~3%. Can be adjusted by internal potential meter SVR2
Over Current Protection	9~12Volts(DC) 95~110%; 15~48Volts(DC) 130% max Constant current limiting, auto recov after fault condition is removed (Note 3)
Hold Up Time	50ms/230VAC ; 16ms/115VAC
LED Voltage Operation	3~9Volts (Note 5)
Rise Time	500ms, 30ms/230VAC 1500ms, 30ms/115VAC
Voltage Tolerance	±5.0% (Note 2)

Physical Specifications

Size (mm)	181 x61.5 x 35 mm
Size (Inches)	7.13” x 2.42” x 1.38”
Weight (g)	400g
Weight (oz)	14.11 oz

Notes

1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

2. Tolerance : includes set up tolerance, line regulation and load regulation.

3. Derating may be needed under low input voltage. Please check the derating curve for more details.

4. Output voltage can be adjusted through the SVR1 on the PCB ; limit of output constant current level can be adjusted through the SVR2 on the PCB.

5. Constant current operation region is within the specified output voltage

range above. This is the suitable operation region for LED related applications.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Power Supply Search

ELN60 60w Constant Current LED/Lighting Power Supplies