DUP75 75w Power Supplies

Isolated and Unregulated 0.75 WATT Modular DC/DC Converters

	Low Cost
	0.75 Watt in SIP pkg
	Unregulated Outputs
	750VDC Isolation
	Non-Conductive Case
	Internal Filters

Model Number	Input Voltage Range	Output Voltage	Output Amps	Load Regulation
DUP75-05S05	4.5-5.5 VDC	5 VDC	0.15Amps	± 10%
DUP75-12S05	10.8-13.2 VDC	5 VDC	0.15Amps	± 10%
DUP75-15S05	13.5-16.5 VDC	5 VDC	0.15Amps	± 10%
DUP75-24S05	21.6-26.4 VDC	5 VDC	0.15Amps	± 10%
DUP75-05S12	4.5-5.5 VDC	12 VDC	0.062Amps	±6% 10%-FL
DUP75-12S12	10.8-13.2 VDC	12 VDC	0.062Amps	±6% 10%-FL
DUP75-15S12	13.5-16.5 VDC	12 VDC	0.062Amps	±6% 10%-FL
DUP75-24S12	21.6-26.4 VDC	12 VDC	0.062Amps	±6% 10%-FL
DUP75-05S15	4.5-5.5 VDC	15 VDC	0.050Amps	±6% 10%-FL
DUP75-12S15	10.8-13.2 VDC	15 VDC	0.050Amps	±6% 10%-FL
DUP75-15S15	13.5-16.5 VDC	15 VDC	0.050Amps	±6% 10%-FL
DUP75-24S15	21.6-26.4 VDC	15 VDC	0.050Amps	±6% 10%-FL
DUP75-05D05	4.5-5.5 VDC	±5 VDC	±0.75Anos	±6% 10%-FL
DUP75-12D05	10.8-13.2 VDC	±5 VDC	±0.75Anos	±6% 10%-FL
DUP75-15D05	13.5-16.5 VDC	±5 VDC	±0.75Anos	±6% 10%-FL
DUP75-24D05	21.6-26.4 VDC	±5 VDC	±0.75Anos	±6% 10%-FL
DUP75-05D12	4.5-5.5 VDC	±12 VDC	±0.30Amps	±6% 10%-FL
DUP75-12D12	10.8-13.2 VDC	±12 VDC	±0.30Amps	±6% 10%-FL
DUP75-15D12	13.5-16.5 VDC	±12 VDC	±0.30Amps	±6% 10%-FL
DUP75-24D12	21.6-26.4 VDC	±12 VDC	±0.30Amps	±6% 10%-FL
DUP75-05D15	4.5-5.5 VDC	±15 VDC	±0.25Amps	±6% 10%-FL
DUP75-12D15	10.8-13.2 VDC	±15 VDC	±0.25Amps	±6% 10%-FL
DUP75-15D15	13.5-16.5 VDC	±15 VDC	±0.25Amps	±6% 10%-FL
DUP75-24D15	21.6-26.4 VDC	±15 VDC	±0.25Amps	±6% 10%-FL

DUP75 series

Input Specifications

Input Voltage Range

4.5-5.5 VDC

General Specifications

Isolation	750VDC
Insulation Resistance	10000 M Ohms
Efficiency	80%, typ
Switching Frequency	100Khz

Physical Specifications

Case Material	Non-Conductive Black Plastic
Construction	Fully Encapsulated

Output Specifications

Output Voltage	5 VDC
Output Amps	0.15Amps
Load Regulation	± 10%
Line Regulation	± 1.2%/1% of Vin
Temperature Coefficient	±0.1%/°C
Ripple and Noise	50mV Pk-Pk, typ
Voltage Stability	±5%, max
Short Circuit Protection	1 Second max

Environmental Specifications

Operating Temperature	-25 to +71 °C(FL)
Case Temperature	110 °C
Storage Temperature	-55 to +125°C
MTBF	5.5 MHrs MIL-HDBK 217FTA=25°C FL

Notes

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Power Supply Search

DUP75 75w Power Supplies