Order by phone: 1-800-823-8082 / +1-508-964-6300 M-F 8:30am to 5:30pm EST

DRP240 240 Watt DIN Rail Mount Power Supplies

240W Single Output Industrial DIN RAIL Power Supply

Universal AC input/Full range

Protections: Short circuit/over load /over voltage/over temperature

Cooling by free air convection

Can be installed on DIN rail S-35/7.5 or 15

UL508 (industrial control equipment) approved

LED indicator for power on, 100% full load burn-in test, Fixed switching frequency at 100KHz

Model Number

Output Voltage

Output Amps

Ripple and Noise

Over Voltage Protection

DC Voltage Adjust

Minimum Load Requirement

Efficiency

DRP-240-24

24V

10A

80mVp-p max. (Note 2)

30~36V Shut down o/p voltage, re-power on to recover

24~48V

0~10A

84%

DRP-240-48

48V

5A

150mVp-p max. (Note 2)

54~60V Shut down o/p voltage, re-power on to recover

48~53V

0~5A

85%

DRP-240 series

Input Specifications

Input Voltage Range

85~264VAC 120~370VDC (Note 5)

Frequency Range

47 ~ 63Hz

Inrush Current

Cold Start 27A/115VAC 45A/230VAC typ.

Input Current

2.8A/115VAC 1.4A/230VAC typ.

Leakage Current

<3.5mA / 240 VAC

Power Factor Correction

0.96/230VAC 0.99/115VAC at full load. Typ.

General Specifications

Isolation

3KVAC

Isolation Input-Ground

1.5KVAC

Isolation Output-Ground

0.5KVAC

Insulation Resistance

100M Ohms/500VDC

Efficiency

84%

Safety Approvals

UL508, UL60950,-1, TUV EN60950-1 Approved

Harmonic Current

Compliance to EN61000-3-2,-3

Environmental Specifications

Operating Temperature

-10°C to +70°C (Refer to output load derating curve)

Storage Temperature

-20°C to +85°C

Working Humidity

20~90% RH non condensing

Storage Humidity

10 ~ 95% RH

EMI

Compliance to EN55011 EN55022 (CISPR22) Class B

MTBF

105.5KHrs min. MIL-HDBK-217F (25°C)

Vibration

10~500Hz, 2G10min./1cycle, period for 60min. each along X, Y, Z axes

EMS

Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024, EN61000-6-2 (EN50082-2) heavy industry level,criteria A

Output Specifications

Output Voltage

24V

Output Amps

10A

Load Regulation

± 1.0%

Line Regulation

± 0.5%

Temperature Coefficient

± 0.03% / °C (0-50°C)

Ripple and Noise

80mVp-p max. (Note 2)

Over Voltage Protection

30~36V Shut down o/p voltage, re-power on to recover

Over Current Protection

105 ~ 150% rated output power. Constant current limiting, recovers automatically after fault condition is recovered

Over Temperature Protection

100°C ±5°C (TSW: Detect on heatsink of power transistor) Shut down o/p voltage, recovers automatically after temperature goes down.

Voltage Tolerance

± 1.0% (Note 3)

DC Voltage Adjust

24~48V

Minimum Load Requirement

0~10A

Rise Time

800ms, 40ms/230VAC 800ms, 40ms/115VAC at full load

Hold Up Time

24ms/230VAC 24ms/115VAC at full load typ.

Physical Specifications

Size (mm)

125.5x125.2x100

Weight (g)

1.2Kg; 12pcs/15.5Kg/1.2CUFT

Notes

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

2. Ripple and noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equpiment must be re-confirmed that it still meets EMC directives.

5. Derating may be needed under low input voltages. Please check the derating curve for more details.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.