LED Lighting Drivers: CLG60 60w Power Supplies

60W Single Output Class 2 Switching Power Supply

	Universal AC input / Full range
	Built-in active PFC function
	Protections: Short Circuit / Over voltage / Overload / Over temperature
	IP67 design for indoor or outdoor installations
	UL1310 Class 2 power unit
	Cooling by free air convection

Model Number	DC Voltage Adjust (typ.)	Output Voltage	Output Amps	Ripple and Noise	Over Voltage Protection	Over Current Protection	Over Temperature Protection	Efficiency
CLG-60-12	11.5~13Volts(DC)	12 Volts(DC)	5 Amps	2 Vpk-pk (Note 1)	13.8~16 Volts(DC) Shut down o/p voltage, re-power	95~110% Constant current limiting, auto recov	90°C±10°C (TSW1) detect on heatsink of power transistor shut down o/p voltage auto recov	81.5%
CLG-60-15	14.5~16.2Volts(DC)	15 Volts(DC)	4 Amps	2.4 Vpk-pk (Note 1)	17.5~21 Volts(DC) Shut down o/p voltage, re-power	110% max Constant current limiting, auto recov	85°C±10°C detect on heatsink of power transistor shut down o/p voltage auto recov	84.5%
CLG-60-20	19.5~22Volts(DC)	20 Volts(DC)	3 Amps	1.8 Vpk-pk (Note 1)	22.8~25 Volts(DC) Shut down o/p voltage, re-power	110% max Constant current limiting, auto recov	85°C±10°C detect on heatsink of power transistor shut down o/p voltage auto recov	86%
CLG-60-24	24~26Volts(DC)	24 Volts(DC)	2.5 Amps	2.7 Vpk-pk (Note 1)	28~32 Volts(DC) Shut down o/p voltage, re-power	110% max Constant current limiting, auto recov	85°C±10°C detect on heatsink of power transistor shut down o/p voltage auto recov	86%
CLG-60-27	25~30Volts(DC)	27 Volts(DC)	2.3 Amps	2.7 Vpk-pk (Note 1)	31~35 Volts(DC) Shut down o/p voltage, re-power	110% max Constant current limiting, auto recov	85°C±10°C detect on heatsink of power transistor shut down o/p voltage auto recov	86.5%
CLG-60-36	32.5~39Volts(DC)	36 Volts(DC)	1.7 Amps	3.6 Vpk-pk (Note 1)	41~46 Volts(DC) Shut down o/p voltage, re-power	110% max Constant current limiting, auto recov	85°C±10°C detect on heatsink of power transistor shut down o/p voltage auto recov	87%
CLG-60-48	43.6~51.8Volts(DC)	48 Volts(DC)	1.3 Amps	4.6Vpk-pk (Note 1)	54~60 Volts(DC) Shut down o/p voltage, re-power	110% max Constant current limiting, auto recov	85°C±10°C detect on heatsink of power transistor shut down o/p voltage auto recov	87%

CLG-60 series

Input Specifications

Input Voltage Range	90-264VAC ; 127~370Volts(DC) (Note 4)
Input Current	0.8 Amps @ 115VAC; 0.4 Amps @ 230VAC
Frequency Range	47-63 Hz
Inrush Current	40 Amps @ 230VAC (Cold start)
Leakage Current	< 0.75 mAmps @ 240VAC
DC Voltage Adjust (typ.)	11.5~13Volts(DC)
Power Factor Correction	PF? 0.9 at 75~100 load 115VAC / 230VAC

General Specifications

Isolation	3750VAC Input - Output; 1880VAC Input - Ground; 500VAC Output - Ground
Efficiency	81.5%
Safety Approvals	UL1310 Class 2; TUV EN61347-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91(except for 48V)
Insulation Resistance	I/P-O/P 100M? / 500VDC /25°C/70% RH
EMI	Compliance to EN55015; EN55022B (CISPR22B)
EMS	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547; light industry level, (surge 4KV) criteria A
Harmonic Current	Compliance to EN610000-3-2 Class C (?75% load); EN61000-3-3

Environmental Specifications

Operating Temperature	-30°C to +70°C (See Derate Curve)
Storage Temperature	-40°C to +80°C, 10~95% RH
Relative Humidity	20~95% RH non cond
MTBF	495.7KHrs min, MIL-HDBK-217F(25°C)
Vibration	10~500Hz, 5G 12min./1cycle,. period for 72min, each along X, Y. Z axes
Cooling	free air convection
IP Rating	IP67
Temperature Coefficient	±0.03%/°C (0~50°C)

Output Specifications

Output Voltage	12 Volts(DC)
Output Amps	5 Amps
Load Regulation	±5.0%
Line Regulation	±3.0%
Ripple and Noise	2 Vpk-pk (Note 1)
Over Voltage Protection	13.8~16 Volts(DC) Shut down o/p voltage, re-power
Over Current Protection	95~110% Constant current limiting, auto recov
Over Temperature Protection	90°C±10°C (TSW1) detect on heatsink of power transistor shut down o/p voltage auto recov
Short Circuit Protection	Hiccup mode, auto recov (Note 3)
Rise Time	3000mS @ 230VAC 5000mS @ 115VAC
Voltage Tolerance	±10% (Note 2)

Physical Specifications

Size (mm)	195.6 x 61.5 x 38.8 mm
Size (Inches)	7.70” x 2.42” x 1.53”
Weight (g)	860g
Weight (oz)	30.34 oz

Notes

1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

Direct connecting to LEDs is not suggested for models with “RIPPLE & NOISE” > 10% and using additional drivers is highly recommended.

2. Tolerance : includes set up tolerance, line regulation and load regulation.

3. Please refer to OLP characteristics.

4. Derating may be needed under low input voltage. Please check the derating curve for more details.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Power Supply Search

CLG60 60w LED/Lighting Power Supplies