AS40 40w Switch Mode Power Supplies

40W Single Output Switching Power Supply

	Universal AC input/Full range
	Protections: Short circuit/Over load
	Cooling by free ain convection
	100% full load burn-in test
	Fixed switching frequency at 36KHz

Model Number	Output Voltage	Output Amps	Load Regulation	Ripple and Noise	Over Voltage Protection	DC Voltage Adjust (typ.)	Efficiency
AS40-5	5V	8A	±1.0	75mVp-p max. (note 2)	5.75~6.75V hiccup mode, recovers automatically after fault condition is removed	4.75~5.5V	72%/115VAC typ.
AS40-12	12V	3.5A	±0.5	100mVp-p max. (note 2)	13.8~16.2V hiccup mode, recovers automatically after fault condition is removed	10.8~13.2V	76%/115VAC typ.
AS40-15	15V	2.8A	±0.5	100mVp-p max. (note 2)	17.25~20.25V hiccup mode, recovers automatically after fault condition is removed	13.5~16.5V	76%/115VAC typ.
AS40-24	24V	1.8A	±0.5	100mVp-p max. (note 2)	27.6~32.4V hiccup mode, recovers automatically after fault condition is removed	21.6~26.4V	78%/115VAC typ.

AS40 series

Input Specifications

Input Voltage Range	85~264VAC 120~370VDC
Frequency Range	47~63Hz
Inrush Current	Cold Start 25A/115VAC 50A/230VAC

General Specifications

Isolation	4242VDC
Isolation Input-Ground	2121VDC
Isolation Output-Ground	707VDC
Insulation Resistance	72%/115VAC typ.
Switching Frequency	UL1012, UL1950, TUV EN60950 Approved

Environmental Specifications

Operating Temperature	-10~+60°C (refer to output load derating curve)
Storage Temperature	-20~+85°C
Relative Humidity	20~90% RH non-condensing
EMI	EN55011, Class B (Designed to meet)
MTBF	314.1K hrs min. MIL-HDBK-217F (25°C)
EMS	Compliance to EN61000-4-2,3,4,5; ENV50204, EN55024, Light industry level, criteria A

Output Specifications

Output Voltage	5V
Output Amps	8A
Load Regulation	±1.0
Line Regulation	±0.5
Temperature Coefficient	0.3%/°C (0~50°C)
Ripple and Noise	75mVp-p max. (note 2)
Over Voltage Protection	5.75~6.75V hiccup mode, recovers automatically after fault condition is removed
Over Current Protection	105~150% rated out put power, hiccup mode, recovers automatically after fault condition is removed
DC Voltage Adjust (typ.)	4.75~5.5V
Hold Up Time	70mS/230VAC 15mS/115VAC at full load

Physical Specifications

Size (mm)	129x98x38mm
Size (Inches)	5.08”x3.86”x 1.5”
Weight (g)	440g; 20pcs/13900g/0.86CUFT

Notes

1. All paramterers NOT specially mentioned are measure at 230VAC input, rated load and 25°C of ambient temperature.

2. Ripple and noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf and 47uf parallell capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Power Supply Search

AS40 40w Switch Mode Power Supplies