Order by phone: 1-800-823-8082 / +1-508-964-6300 M-F 8:30am to 5:30pm EST

AS320 320 Watt Switch Mode Enclosed Power Supplies

320W Single Output Switching Power Supply

AC input range selectable by switch

Protections: Short circuit/Over load/Over voltage/Over termperature

Forced air cooling by built-in DC fan

Cooling Fan ON-OFF auto control

100% full load burn-in test

Fixed switching frequency at 90KHz

Model Number

Output Voltage

Output Amps

Load Regulation

Ripple and Noise

Over Voltage Protection

DC Voltage Adjust (typ.)

Efficiency

AS320-5 5V 50A

±1.0

150mVp-p max. (note 2)

5.75~6.75V hiccup mode, recovers automatically after fault condition is removed

4.5~5.7V

77% typ.

AS320-7.5 7.5V 36A

±1.0

150mVp-p max. (note 2)

9.4~10.9V hiccup mode, recovers automatically after fault condition is removed

6~9V

80% typ.

AS320-12 12V 25A

±0.5

150mVp-p max. (note 2)

13.8~16.2V hiccup mode, recovers automatically after fault condition is removed

10~13.2V

82% typ.

AS320-13.5 13.5V 22A

±0.5

150mVp-p max. (note 2)

15.5~18.2V hiccup mode, recovers automatically after fault condition is removed

12~15V

83% typ.

AS320-15 15V 20A

±0.5

150mVp-p max. (note 2)

18~21V hiccup mode, recovers automatically after fault condition is removed

13.5~18V

84% typ.

AS320-24 24V 12.5A

±0.5

150mVp-p max. (note 2)

27.6~32.4V hiccup mode, recovers automatically after fault condition is removed

20~26.4V

86% typ.

AS320-27 27V 11A

±0.5

200mVp-p max. (note 2)

33.7~39.2V hiccup mode, recovers automatically after fault condition is removed

26~32V

86% typ.

AS320-48 48V 6.5A

±0.5

240mVp-p max. (note 2)

57.6~67.2V hiccup mode, recovers automatically after fault condition is removed

41~56V

87% typ.

AS320 series

Input Specifications

Input Voltage Range

88~132VAC/176~264VAC selected switch 248~370VDC

Frequency Range

47~63Hz

Inrush Current

18A/115VAC 36A/230VAC

General Specifications

Isolation

4242VDC

Isolation Input-Ground

2121VDC

Isolation Output-Ground

707VDC

Insulation Resistance

77% typ.

Switching Frequency

UL60950-1 Approved

Environmental Specifications

Operating Temperature

-10~+60°C (refer to output load derating curve)

Storage Temperature

-20~+85°C

Relative Humidity

20~90% RH non-condensing

EMI

Compliance to EN55022 (CISPR22) Class B

MTBF

188.7K hrs min. MIL-HDBK-217 (25°C)

Output Voltage

5V

Output Amps

50A

Load Regulation

±1.0

Line Regulation

±0.5

Temperature Coefficient

0.3%/°C (0~50°C)

Ripple and Noise

150mVp-p max. (note 2)

Over Voltage Protection

5.75~6.75V hiccup mode, recovers automatically after fault condition is removed

Over Current Protection

105~135% rated out put power, hiccup mode, recovers automatically after fault condition is removed

DC Voltage Adjust (typ.)

4.5~5.7V

Hold Up Time

24mS at ful load typ.

Physical Specifications

Size (mm)

215x115x50mm

Size (Inches)

8.46”x4.53”x 1.97”

Weight (g)

1080g; 12pcs/13800g/0.92CUFT

Output Specifications

Notes

1. All paramterers NOT specially mentioned are measure at 230VAC input, rated load and 25°C of ambient temperature.

2. Ripple and noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf and 47uf parallell capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.