AS150 150w Switch Mode Power Supplies

150W Single Output Switching Power Supply

	AC input range selectable by switch
	Protections: Short Circuit/Over load/Over voltage
	Cooling by free air convection
	100% full load burn-in test
	Fixed switching frequency at 25KHz

Model Number	Output Voltage	Output Amps	Load Regulation	Line Regulation	Ripple and Noise	Over Voltage Protection	DC Voltage Adjust (typ.)	Efficiency
AS150-5	5V	30A	±0.5	±0.5	150mVp-p max. (note 2)	5.75~6.75 shut down o/p voltage, re-power on to recover	4.5~5.5V	78% typ.
AS150-7.5	7.5V	20A	±0.5	±0.5	150mVp-p max. (note 2)	8.63~10.13V shut down o/p voltage, re-power on to recover	6~8.3V	80% typ.
AS150-9	9V	16.7A	±0.5	±0.5	180mVp-p max. (note 2)	10.35~12.2V shut down o/p voltage, re-power on to recover	8~10.4V	80% typ.
AS150-12	12V	12.5A	±0.3	±0.3	180mVp-p max. (note 2)	13.8~16.2V shut down o/p voltage, re-power on to recover	10.6~13.2V	82% typ.
AS150-13.5	13.5V	11.2A	±0.3	±0.3	180mVp-p max. (note 2)	15.53~18.2V shut down o/p voltage, re-power on to recover	12~15V	83% typ.
AS150-15	15V	10A	±0.3	±0.3	180mVp-p max. (note 2)	17.25~20.3V shut down o/p voltage, re-power on to recover	13.5~16.5V	84% typ.
AS150-24	24V	6.5A	±0.2	±0.2	240mVp-p max. (note 2)	30~34.8V shut down o/p voltage, re-power on to recover	21~28V	85% typ.
AS150-27	27V	5.6A	±0.2	±0.2	240mVp-p max. (note 2)	31.1~36.45V shut down o/p voltage, re-power on to recover	24~30V	86% typ.
AS150-48	48V	3.2A	±0.2	±0.2	240mVp-p max. (note 2)	55.2~64.8V shut down o/p voltage, re-power on to recover	43~53V	87% typ.

AS150 series

Input Specifications

Input Voltage Range	88~132VAC/176~264VAC selected switch 248~370VDC
Frequency Range	47~63Hz
Inrush Current	Cold Start 35A typ.

General Specifications

Isolation	4242VDC
Isolation Input-Ground	2121VDC
Isolation Output-Ground	707VDC
Insulation Resistance	78% typ.
Switching Frequency	UL1012, UL1950-1, TUV EN60950-1 Approved

Environmental Specifications

Operating Temperature	-10~+60°C (refer to output load derating curve)
Storage Temperature	-20~+85°C
Relative Humidity	20~90% RH non-condensing
EMI	Compliance to EN55022 (CISPR22) Class B
MTBF	286.7K hrs min. MIL-HDBK-217F (25°C)
EMS	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A

Output Voltage	5V
Output Amps	30A
Load Regulation	±0.5
Line Regulation	±0.5
Temperature Coefficient	0.3%/°C (0~50°C)
Ripple and Noise	150mVp-p max. (note 2)
Over Voltage Protection	5.75~6.75 shut down o/p voltage, re-power on to recover
Over Current Protection	105~150% rated out put power, shut down o/p voltage, re-power on to recover
DC Voltage Adjust (typ.)	4.5~5.5V
Hold Up Time	28mS at full load typ.

Physical Specifications

Size (mm)	199x110x50mm
Size (Inches)	7.83”x4.33”x 1.97”
Weight (g)	800g; 16pcs/13800g/095CUFT

Notes

1. All paramterers NOT specially mentioned are measure at 230VAC input, rated load and 25°C of ambient temperature.

2. Ripple and noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf and 47uf parallell capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Output Specifications

Power Supply Search

AS150 150w Switch Mode Power Supplies