100W Single Output Switching Power Supply

	AC input range selectible by switch
	Protections: Short Circuit/Over load/Over voltage
	Cooling by free air convection
	100% full load burn-in test
	Fixed switching frequency at 83KHz

Model Number	Output Voltage	Output Amps	Load Regulation	Ripple and Noise	Over Voltage Protection	DC Voltage Adjust (typ.)	Efficiency
AS100F-5	5V	20A	±1.0	100mVp-p max. (note 2)	5.75~6.75V hiccup mode, recovers automatically after fault condition is removed	4.5~5.5VDC	76%
AS100F-7.5	7.5V	13.5A	±0.5	125mVp-p max. (note 2)	8.63~10.13V hiccup mode, recovers automatically after fault condition is removed	6.75~8.25VDC	78%
AS100F-12	12V	8.5A	±0.5	125mVp-p max. (note 2)	13.8~16.2V hiccup mode, recovers automatically after fault condition is removed	10.8~13.2VDC	80%
AS100F-15	15V	6.7A	±0.5	125mVp-p max. (note 2)	17.25~20.25V hiccup mode, recovers automatically after fault condition is removed	13.5~16.5VDC	81%
AS100F-24	24V	4.5A	±0.5	150mVp-p max. (note 2)	27.6~32.4V hiccup mode, recovers automatically after fault condition is removed	21.6~26.4VDC	83%
AS100F-48	48V	2.2A	±0.5	150mVp-p max. (note 2)	55.2~64.8V hiccup mode, recovers automatically after fault condition is removed	43.2~52.8VDC	84%

AS100F series

Input Specifications

Input Voltage Range	88~132VAC/176~264VAC selected by jumper or switch 248~370VDC
Frequency Range	47~63Hz
Inrush Current	Cold Start 20A/115VAC 40A/230VAC typ.

Physical Specifications

Size (mm)	199x98x38mm
Size (Inches)	7.83”x3.86”x 1.5”
Weight (g)	650g; 20 pcs/14200g/0.8CUFT

General Specifications

Isolation	4242VDC
Isolation Input-Ground	2121VDC
Isolation Output-Ground	707VDC
Switching Frequency	CSA60950-1 (for24V only), UL1012, TUV EN60950-1 Approved

Output Specifications

Output Voltage	5V
Output Amps	20A
Load Regulation	±1.0
Line Regulation	±0.5
Temperature Coefficient	0.3%/°C (0~50°C)
Ripple and Noise	100mVp-p max. (note 2)
Over Voltage Protection	5.75~6.75V hiccup mode, recovers automatically after fault condition is removed
Over Current Protection	105~150Hz, 2G 10 min./1 cycle, 60 min. each along X, Y, Z axes
DC Voltage Adjust (typ.)	4.5~5.5V
Hold Up Time	20mS at full load

Environmental Specifications

Operating Temperature	-10~+60°C (refer to output load derating curve)
Storage Temperature	-20~+85°C
Relative Humidity	10~95% RH
MTBF	314.9K hrs min. MIL-HDBK-217F (25°C)
EMS	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A

Notes

1. All paramterers NOT specially mentioned are measure at 230VAC input, rated load and 25°C of ambient temperature.

2. Ripple and noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf and 47uf parallell capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

AS100F 100 Watt Power Supplies

100W Single Output Switching Power Supply

Power Supply Search