TP75DRL 75w Power Supplies

75W Triple Output with PFC Function

	Universal AC input/ Full range
	Built-in active PFC function, PF>0.95
	Protections: Short circuit/Over load/Over voltage
	Low profile: 33mm thickness
	LED indicator for power on
	Cooling by free air convection

Model Number	Output Voltage	Output Amps	Ripple and Noise	Minimum Load Requirement
TP75-A	5V, 12V, -5V	7A, 3A, 0.6 A	100mVp-p max., 120mVp-p max., 100mVp-p max. (Note 2)	1.5~10A, 0.2~4A, 0~0.6A
TP75-B	5V, 12V, -12V	7A, 3A, 0.4 A	100mVp-p max., 120mVp-p max., 120mVp-p max. (Note 2)	1.5~10A, 0.2~4A, 0~0.6A
TP75-C	5V, 15V, -15V	6A, 2.5A, 0.5A	100mVp-p max., 120mVp-p max., 120mVp-p max. (Note 2)	1.5~10A, 0.2~3A, 0~0.6A
TP75-D	5V, 24V, 12V	7A, 1.5A, 0.4A	100mVp-p max., 120mVp-p max., 120mVp-p max. (Note 2)	1.5~10A, 0.2~2.5A, 0~0.6A
TP75-03	5V, 3.3V, 12V	9A, 8A, 0.3A	100mVp-p max., 50mVp-p max., 120mVp-p max. (Note 2)	1.5~10A, 0.2~8A, 0~0.6A

TP75/DRL series

General Specifications

Environmental Specifications

Operating Temperature	-10~+60°C (Refer to output load derating curve)
Storage Temperature	-20°C to +85°C
Working Humidity	20 ~ 90 % RH non-condensing
Storage Humidity	10~95% RH
EMI	Compliance to EN55022 (CISPR22) Class B (Note 4)
MTBF	198.4K hrs min. MIL-HDBK-217F (25°C)
Vibration	10~500HZ, 2G 10 min/1 cycle, 60 min. each along X, Y, Z axes
EMS	Compliance to EN-61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A (Note 4)

Input Specifications

Isolation	3KVAC (Note 4)
Isolation Input-Ground	1.5KVAC (Note 4)
Isolation Output-Ground	0.5KVAC 1min. (Note 4)
Insulation Resistance	100M Ohms/500VDC (Note 4)
Efficiency	70% typ.
Safety Approvals	UL60950-1, TUV EN60950-1 Approved (Note 4)
Harmonic Current	Compliance to EN61000-3-2,-3 (Note 4)

Input Voltage Range	90~264VAC 127~370VDC (Note 5)
Frequency Range	47~63Hz
Inrush Current	Cold Start ?20A/230V typ.
Input Current	1.5A/115VAC 0.8A/115VAC typ.
Leakage Current	<2mA/240VAC
Power Factor Correction	PF>0.95/230VAC PF>0.98/115VAC at full load

Physical Specifications

Size (mm)	179mm x 99mm x 33mm
Weight (g)	0.65Kg; 20pcs/12.7Kg/0.64CUFT

Notes

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.

2. Ripple and noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equpiment must be re-confirmed that it still meets EMC directives.

5. Derating may be needed under low input voltages. Please check the derating curve for more details.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Output Specifications

Output Voltage	5V
Output Amps	7A
Load Regulation	±3.0%
Line Regulation	±1%
Temperature Coefficient	±0.03%/°C (0~50°C)
Ripple and Noise	100mVp-p max. (Note 2)
Over Voltage Protection	5.75~6.75V on +5V. Protection type: Shutdown o/p voltage, re-power on to recover.
Over Current Protection	105~150% rated output power. Protection type: Hiccup mode, recovers automatically after fault condition is removed.
Voltage Tolerance	±3.0% (Note 3)
DC Voltage Adjust	4.75~5.5V
Minimum Load Requirement	1.5~10A
Rise Time	800ms, 60ms at full load
Hold Up Time	36ms at full load typ.

Power Supply Search

TP75DRL 75w Power Supplies