100W Single Output Switching Power Supply

	Universal AC input
	Protections:Short circuit/Over load/Over voltage
	Cooling by free air convection
	LED indicator for power on
	All using 105°C long life electrolytic capacitors
	High efficiency, long life and high reliability

Model Number	Output Voltage	Output Amps	Load Regulation	Ripple and Noise	Over Voltage Protection	DC Voltage Adjust (typ.)	Efficiency
RS100-3.3	3.3 Volts(DC)	20 Amps	±2.0% (Note 4)	80mV pk-pk (Note 1)	3.8 ~ 4.45Volt(DC) Hiccup mode, auto recov	3.2~3.5Volt(DC)	0.74
RS100-5	5 Volts(DC)	16 Amps	±1.0% (Note 4)	80mV pk-pk (Note 1)	5.75 ~ 6.75Volt(DC) Hiccup mode, auto recov	4.75~5.5Volt(DC)	0.77
RS100-12	12 Volts(DC)	8.5 Amps	±0.5% (Note 4)	120mV pk-pk (Note 1)	13.8 ~ 16.2Volt(DC) Hiccup mode, auto recov	11.4~13.2Volt(DC)	0.81
RS100-15	15 Volts(DC)	7.0 Amps	±0.5% (Note 4)	120mV pk-pk (Note 1)	17.25 ~ 20.25Volt(DC) Hiccup mode, auto recov	14.25~16.5Volt(DC)	0.82
RS100-24	24 Volts(DC)	4.5 Amps	±0.5% (Note 4)	120mV pk-pk (Note 1)	27.6~ 32.4Volt(DC) Hiccup mode, auto recov	22.8~26.4Volt(DC)	0.84
RS100-48	48 Volts(DC)	2.3 Amps	±0.5% (Note 4)	200mV pk-pk (Note 1)	55.2~ 64.8Volt(DC) Hiccup mode, auto recov	45.6~52.8Volt(DC)	0.84

RS100 series

Input Specifications

Input Voltage Range	90 ~ 264 VAC; 125~373 Volts(DC)
Input Reflected Ripple Current	2.5 Amps. @ 115VAC, 1.5 Amps. @ 230VAC
Frequency Range	47-63 Hz
Inrush Current	40Amps / 230VAC (cold start)

General Specifications

Isolation	4242VDC
Isolation Input-Ground	2121VDC
Isolation Output-Ground	707VDC
Insulation Resistance	74%
Switching Frequency	UL60950-1, TUV EN60950-1 Approved

Environmental Specifications

Operating Temperature	-25°C to +70°C (See Derate Curve)
Storage Temperature	-40°C to +85°C, 10~95% RH
Relative Humidity	20~90% RH non cond
MTBF	260.8KHrs min,MIL-HDBK-217F(25°C)
EMS	Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204,EN61000-6-2(EN50082-2) heavy Industry Level, Criteria A

Output Specifications

Output Voltage	3.3 Volts(DC)
Output Amps	20 Amps
Load Regulation	±2.0% (Note 4)
Line Regulation	±0.5% (Note 3)
Temperature Coefficient	±0.03% / °C (0-50°C)
Ripple and Noise	80mV pk-pk (Note 1)
Over Voltage Protection	3.8 ~ 4.45Volt(DC) Hiccup mode, auto recov
Over Current Protection	110 ~ 150% rated output power Hiccup mode, auto recov
DC Voltage Adjust (typ.)	3.2~3.5Volt(DC)
Hold Up Time	100mS/230VAC, 18mS/115VAC

Size (mm)	159 x 97 x 38mm
Size (Inches)	6.26” x 3.81 ” x 1.50 ”
Weight (g)	600g
Weight (oz)	21.16oz

Notes

Physical Specifications

1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Power Supply Search

RS100 100w Switch Mode Power Supplies

100W Single Output Switching Power Supply