150 Watt Enclosed with DIN Rail mount and PFC

	150 Watts output power
	Universal 90-264VAC Input
	5VDC to 48VDC Outputs
	3000VAC input to Output Isolation
	Active power factor correction

Model Number	Output Voltage	Output Amps	Load Regulation	Line Regulation	Ripple and Noise
PMMK150S-5D	5 VDC (Note 6)	30	± 0.5%, 10%-FL typ. (Note 7)	±0.5% (Note 8)	100mV pk-pk (Notes 1, 3, 10)
PMMK150S-12D	12 VDC (Note 6)	12.5	± 0.5%, 10%-FL typ. (Note 7)	±0.5% (Note 8)	100mV pk-pk (Notes 1, 3, 10)
PMMK150S-15D	15 VDC (Note 6)	10	± 0.5%, 10%-FL typ. (Note 7)	±0.5% (Note 8)	100mV pk-pk (Notes 1, 3, 10)
PMMK150S-24D	24 VDC (Note 6)	6.3	± 0.5%, 10%-FL typ. (Note 7)	±0.5% (Note 8)	100mV pk-pk (Notes 1, 3, 10)
PMMK150S-48D	48 VDC (Note 6)	3.2	± 0.5%, 10%-FL typ. (Note 7)	±0.5% (Note 8)	100mV pk-pk (Notes 1, 3, 10)
PMMK150D-AD	5/12 VDC (Note 6)	15/7	±3/5%, 10%-FL typ. (Note 7)	±0.5/1% (Note 8)	50/100mV pk-pk (Notes 1, 3, 10)
PMMK150D-BD	5/24 VDC (Note 6)	15/3.5	±3/5%, 10%-FL typ. (Note 7)	±0.5/2% (Note 8)	50/200mV pk-pk (Notes 1, 3, 10)
PMMK150D-CD	12/24 VDC (Note 6)	7/3.5	±3/5%, 10%-FL typ. (Note 7)	±1/2% (Note 8)	100/200mV pk-pk (Notes 1, 3, 10)
PMMK150D-DD	12/48 VDC (Note 6)	7/1.5	±3/5%, 10%-FL typ. (Note 7)	±1/4% (Note 8)	100/400mV pk-pk (Notes 1, 3, 10)

PMMK150D series

General Specifications

Isolation	5656VDC (Note 4)
Isolation Input-Ground	2000VAC (Note 4)
Isolation Output-Ground	500VAC (Note 4)
Switching Frequency	67KHz (fixed, typical)
Efficiency	75% min.
Safety Approvals	UL,TUV, CB, CE

Environmental Specifications

Operating Temperature	-10 to +70°C (See Derate Curve)
Storage Temperature	-25 to +85°C
Working Humidity	0% to +95%, non-cond *
MTBF	270,000 Hrs Mil Std 217, 25°C
EMS	EN55011 Class B

Input Specifications

Input Voltage Range	90-264 VAC
Frequency Range	47 ~ 63Hz
Inrush Current	30A @ 115VAC 60A @ 230VAC
Power Factor Correction	0.96 to 0.98

Physical Specifications

Size (Inches)	3.2” x 5.5” x 1.6”
Weight (g)	635g
Weight (oz)	1.4 lb,
Construction	Enclosed DIN Rail

Output Specifications

Notes

1. All measurements should be made directly at the terminals of the power supply.

2. All specifications typical @ 25°C, unless otherwise noted, at nominal line and load.

3. Ripple and noise dependent upon output voltage as specified per particular model.

4. Isolation for up to 1 minute duration.

5. Specified for free air convection cooling.

6. Minimum load is not required for proper operation.

7. Load Regulation is measured by change ±40% of measured output load from 60% full load, with the other output set to 60% full load.

8. Line Regulation measured from 90-264VAC. 100VAC minimum required for full load start.

9. Preset Accuracy measured at nominal load, 120VAC input.

10. O/P Noise measured directly at the pins/terminals at nominal load, 0.1uF bypass and 47uF electrolytic, pk-pk @ 20MHz bandwidth.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Output Voltage	5 VDC (Note 6)
Output Amps	30
Load Regulation	± 0.5%, 10%-FL typ. (Note 7)
Line Regulation	±0.5% (Note 8)
Temperature Coefficient	±0.05%/°C
Ripple and Noise	100mV pk-pk (Notes 1, 3, 10)
Over Voltage Protection	Latching, Auto Recover after fault condition is removed
Short Circuit Protection	Latching, Auto Recover after fault condition is removed
DC Voltage Adjust	±6%, typ
Preset Accuracy	±1%, typ (Note 9)
Hold Up Time	20mS, typ (Nom I/P, FL)

Power Supply Search

PMMK150D 150w Power Supplies

150 Watt Enclosed with DIN Rail mount and PFC