MPS30 30w Power Supplies

	Universal AC input
	Low leakage current ≤0.3mA
	Protections: Short circuit / Overload / Over voltage / Over temperature
	Fixed switching frequency at 100KHz
	Low cost
	High reliability

Model Number	Output Voltage	Output Amps	Minimum Load Requirement	Ripple and Noise	Over Voltage Protection	Efficiency
MPS30-5	5 Volts(DC)	5 Amps	0~5 Amps	80mV pk-pk	5.5~6.75Volts(DC) Hiccup mode, auto recover	72%
MPS30-12	12 Volts(DC)	2.5 Amps	0~2.5 Amps	120mV pk-pk	13.2~16.2Volts(DC) Hiccup mode, auto recover	75%
MPS30-15	15 Volts(DC)	2 Amps	0~2 Amps	150mV pk-pk	16.5~20.25Volts(DC) Hiccup mode, auto recover	76%
MPS30-24	24 Volts(DC)	1.2 Amps	0~1.2 Amps	240mV pk-pk	26.4~32.4Volts(DC) Hiccup mode, auto recover	77%
MPS30-27	27 Volts(DC)	1.1 Amps	0~1.1 Amps	240mV pk-pk	29.7~36.45Volts(DC) Hiccup mode, auto recover	78%
MPS30-48	48 Volts(DC)	0.6 Amps	0~0.6 Amps	240mV pk-pk	52.8~64.8Volts(DC) Hiccup mode, auto recover	78%

MPS30 series

Input Specifications

Input Voltage Range	90-264VAC / 120-370 Volts(DC)
Frequency Range	47-63 Hz
Inrush Current	30Amps @ 230VAC Input (cold start)
Input Current	0.8Amps max @ 115VAC 0.5Amps max @ 230VAC
Leakage Current	< 0.3mA / 230 VAC
Harmonic Input Current	Compliance to EN61000-3-2,-3

Operating Temperature	0.03% / °C (0-50°C)
Storage Temperature	-20°C to +85°C, 10~95% RH
Relative Humidity	20 to +90% RH non cond
EMI	Compliance to EN55011 (CISPR11) Class B
MTBF	366.7KHrs min, MIL-HDBK-217F(25°C)
Vibration	10~500Hz, 2G10min./1cycle, period for 60min. each along X, Y, Z axes
EMS	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN60601-1-2, medical level, criteria A

General Specifications

Environmental Specifications

Isolation	4000VAC
Isolation Input-Ground	1500VAC
Isolation Output-Ground	Short
Insulation Resistance	≥ 100MΩ
Efficiency	72%
Safety Approvals	UL2601-1 TUV EN60601-1 IEC60601-1 approved

Output Specifications

Output Voltage	5 Volts(DC)
Output Amps	5 Amps
Minimum Load Requirement	0~5 Amps
Load Regulation	±2.0%: 5Volts(DC) 1%: 12~48Volts(DC)
Line Regulation	±1.0%: 5~12Volts(DC) ± 5%: 15~48Volts(DC)
Temperature Coefficient	0.03% / °C (0-50°C)
Ripple and Noise	80mV pk-pk
Voltage Tolerance	±3% (note 2)
Over Voltage Protection	5.5~6.75Volts(DC) Hiccup mode, auto recover
Over Current Protection	Above 105% rated output power Hiccup mode, auto recover
Over Temperature Protection	Tj 135°C typ. (U1) detect on main conrol IC, auto recover
Rise Time	500mS, 30mS/230VAC 500mS. 30mS/115VAC
Hold Up Time	70mS @ 230VAC 12mS @ 115VAC

Physical Specifications

Size (mm)	101.6 x 65.8 x 23.5 mm
Size (Inches)	4” x 2.59” x 0.93”
Weight (g)	160g
Weight (oz)	5.64oz

Notes

1. Ripple and Noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor.

2. Tolerance: includes set up tolerance, line regulation and load regulation.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Power Supply Search

MPS30 30w Power Supplies