DR60 60w Power Supplies

60W Single Output Industrial DIN Rail Power Supply

	Universal AC Input
	Protections: Short circuit/ over load / over voltage
	Cooling by free air convection
	Can be installed on DIN rail S-35/7.5 or 15
	Isolation class 2

Model Number	Output Voltage	Output Amps	Ripple and Noise	Over Voltage Protection	Voltage Tolerance	DC Voltage Adjust	Minimum Load Requirement	Efficiency
DR-60-5	5 Volts(DC)	6.5 Amps	80mVpk-pk (Note 1)	5.75~6.75V Shut down o/p voltage, re-power	±2% 5Volts(DC) only (Note 2)	4.75~5.5V	0 ~ 6.5Amps	76%
DR-60-12	12 Volts(DC)	4.5 Amps	120mVpk-pk (Note 1)	13.8~16.2V Shut down o/p voltage, re-power	±1% 12~24Volts(DC) (Note 2)	11.1~13.2V	0 ~ 4.5Amps	82%
DR-60-15	15 Volts(DC)	4 Amps	120mVpk-pk (Note 1)	17.25~20.25V Shut down o/p voltage, re-power	±1% 12~24Volts(DC) (Note 2)	13.5~16.5V	0 ~ 4Amps	83%
DR-60-24	24 Volts(DC)	2.5 Amps	150mVpk-pk (Note 1)	27.6~32.4V Shut down o/p voltage, re-power	±1% 12~24Volts(DC) (Note 2)	21.6~26.4V	0 ~ 2.5Amps	84%

DR-60 series

Input Specifications

Input Voltage Range	90~264VAC / 124-370 Volts (DC)
Frequency Range	47 ~ 63Hz
Inrush Current	18 Amps @ 115VAC / 36 Amps @ 230VAC (Cold Start) typ.
Input Current	1.2 Amps. @ 115VAC / 0.8 Amps. @ 230VAC
Leakage Current	< 1mA / 240VAC

General Specifications

Isolation	3000VAC
Insulation Resistance	? 100M? / 500Volts(DC)
Efficiency	76%
Safety Approvals	UL60950-1 TUV EN60950-1 approved Design refer to EN50178
Harmonic Current	Compliance to EN61000-3-2,-3

Environmental Specifications

Operating Temperature	-20°C to +60°C (See Derate Curve)
Storage Temperature	-40°C to +85°C
Working Humidity	20~90% RH non condensing
Storage Humidity	10 ~ 95% RH
EMI	Compliance to EN55022B (CISPR22B)
MTBF	216.2K Hrs min, MIL-HDBK-217F(25°C )
Vibration	10~500Hz, 2G10min./1cycle, period for 60min. each along X, Y, Z axes
EMS	Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024, EN61000-6-2, EN61204-3,heavy industry level,criteria A

Output Specifications

Output Voltage	5 Volts(DC)
Output Amps	6.5 Amps
Load Regulation	± 1.0%
Line Regulation	± 1.0%
Temperature Coefficient	±0.03%/°C (0 ~ 50°C)
Ripple and Noise	80mVpk-pk (Note 1)
Over Voltage Protection	5.75~6.75V Shut down o/p voltage, re-power
Over Current Protection	105~160% rated output power Constant current limiting,auto recover
Voltage Tolerance	±2% 5Volts(DC) only (Note 2)
DC Voltage Adjust	4.75~5.5V
Minimum Load Requirement	0 ~ 6.5Amps
Rise Time	100ms, 30ms/230VAC; 200mS, 30mS/115VAC @ FL
Hold Up Time	100mS @ 230VAC; 23mS @115VAC @ FL

Physical Specifications

Size (mm)	78 x 93 x 56
Size (Inches)	3.07” x 3.66 ” x 2.20 ”
Weight (g)	300g
Weight (oz)	10.58 oz

Notes

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwith by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Power Supply Search

DR60 60w Power Supplies